双环减速器实体造型及运动模拟.docVIP

双环减速器实体造型及运动模拟 摘 要 双环减速器是一种新型减速器，论述了双环减速器的传动原理、结构特性、传动比、运动学分析、动力学分析及装配条件进行分析研究。建立该环式减速器系统的受力模型,并对减速器的关键部件,如偏心轴轴承、双环减速器的内齿环板，进行受力分析,得出偏心轴承的受力特性曲线。 通过对双环减速器啮合特性的详细分析,提出了双环减速器啮合效率的一种简便、准确的新算法，这种算法提高了对双环减速器的设计效率。论述了机构的平衡性以及两个内齿行星齿轮的瞬时啮合相位差，推导出传动比、转臂偏心轴承作用力及其支承反力最大值的计算公式，绘制出转臂偏心轴承作用力的变化曲线图。学习I-DEAS的造型方法，并在I-DEAS软件中，对双环减速器进行三维实体造型及运动模拟。通过以上的内容分析，为设计和研究这种双环减速器提供了一定的理论依据。 关键词 双环减速器，运动模拟，实体造型,装配条件，算法 ABSTRACT Double-ring reducer is a new kind of deceleration, its transmission principle、structural property、transmission ratio、movement analysis、dynamics analysis and assembly conditions are discussed in this research. The statistic model of ring reducer is established, and its statistic analysis of key components, just as bears of eccentricity shafts、inner teeth ring plate are analyzed and the force property function of eccentricity shaft is gotten. After detail analysis for contact property of double-ring reducer, a simple and accurate method for calculating the efficiency of engagement is extraction, it is useful to raise the designing efficiency of double-ring reducer. The structural balance and the instant phase margin of two inner teeth plate gears are discussed and the contact ratio、the equation for calculating max force of eccentricity shafts are concluded and the force changing curve of eccentricity shafts are drawn. Finally, we learn method of I-DEAS software about 3D entity model, and apply software I-DEAS to establish 3D entity model、virtual assembly and movement simulation of double-ring reducer. After above analysis, these theories for designing and study of double-ring reducer are provided in our research. Keywords Double-ring reducer, movement simulation, the entity model, the assembly condition, program method 目 录 摘 要 Ⅰ ABSTRACT Ⅱ 1绪 论 1 2传动原理及参数确定 2 2.1传动原理 2 2.2 双环减速器的设计 3 2.2.1少齿差内啮合齿轮传动齿轮变位系数的确定 3 2.2.2 新型双环减速器结构的确定 5 2.3 双环减速器齿轮参数设计 7 2.4本章小结 8 3双环减速器的设计 9 3.1双环减速器主要零部件的设计 9 3.1.1内啮合变位圆柱齿轮传动 9 3.1.2减速器各轴转速、功率、转矩的计算 13 3.1.3输出轴的设计计算