毕业设计文献综述-数控数字积分法圆弧插补算法图形仿真.docVIP

数控数字积分法圆弧插补算法图形仿真设计 随着微电子技术，计算机技术的发展，数控机床的性能不断地完善，而数控技术作为数控机床的关键技术，越来越得到更多高校的重视，国内许多专业在数控类专业以及自动化类专业都开设了数控自动化等课程。作为数控技术教学中的一个重要组成，数控插补算法的教学显得既重要又难以掌握，因此在实验中必须重要数控插补的实验性教学，但由于数字插补设备价格昂贵，难以满足大多数时候的需求，如何较好第讲解数控插补原理和观察刀具的运行轨迹，是各个高校必修面对的一个问题。作为数控机床教学型仿真软件的一个模块，开发出一套适合教学和学习的数控数字积分圆弧插补算法的仿真软件势在必行。这样才能较好地讲解数控数字积分圆弧插补算法的原理以及刀具走刀的轨迹。 关键词：数字积分法 插补装置 圆弧曲线 插补算法 Abstract The design of hydraulic drive manipulator movements under the provisions of the order ， use the basic theory, basic knowledge and related mechanical design expertise comprehensively to complete the design，and drawing the necessary assembly, hydraulic system map, PLC control system diagram . Manipulator mechanical structure using tanks, screw ,guide tubes and other mechanical device component ；In the hydraulic drive bodies ，manipulator arm stretching using telescopic tank ，rotating column of tanks used rack ，manipulator movements using tank movements ，the column takes the horizontal movement of tanks。 This text introduce upper and lower material spend design process of manipulator , it include to whole job requirements and analysis of situation of system mainly, confirm the whole structural design systematic in hydraulic pressure through the working course of the system. Analyse whole cyclical process , confirm systematic operation principle picture , require the hydraulic pressure component of the standard for selection according to systematic parameter, finish the installation diagram systematic in hydraulic pressure. Hydraulic pressure integrate piece as now main part , hydraulic pressure of system , hydraulic pressure at present integrate pieces of application and development receive domestic and international hydraulic pressure extensive attention of circle。 Keywords: digital integration interpolation principle interpolation algorithm circular interpolation 一 课题的来源,目的及现状 数控系统中，机床的运动通过插补实现。现代数控系统的高速加工，对运动控制的实时性要求很高，目前数控系统所采用的插不起多为软件插补器，软件插补器虽然有很多优点，但软件插补受计算机软件运行速度限制，插补的速度、精度等性能指标难以满足高