通信工程有源功率因数校正电路的设计.docVIP

单位代码 01 学 号 分 类 号 TN710.1 密 级 毕业设计说明书 有源功率因数校正电路的设计 院（系）名称 信息工程学院 专业名称 通信工程 学生姓名 指导教师 2012年5月20日  有源功率因数校正电路的设计 摘 要 关键词：Active power factor correction circuit design Author:Wei DongLiang Tutor:Pang BaoTang Abstract Will ac 220 V power grid voltage after rectifying the to provide dc is one single phase power application in reality a wide range of variable current solution because the traditional thyristor rectifier diode or will to power produce harmonic current and harm power grid, cause the input power factor drops, to power cause pollution; So active power factor correction (APFC) technology obtained a rapid development. It is in the bridge rectifiers and output capacitors to join a power transformation between circuit, it will become the input current correction rectifier voltage and the sine wave with phase, eliminate the harmonic and reactive current, so the power grid power factor improvement to approximate to 1. Exchange the input voltage bridge rectifier, have the rectifier voltage wave, then the DC/DC transform, after controller make the average of the current line can automatically follow all the wave rectifier voltage change of benchmark, and won the high voltage DC voltage output, eventually provide DC voltage source to load. This article through to power factor correction circuit of the current situation and development of simply introduced, and then discuss what the power factor and power factor of calculation, power factor correction, the principle of the power factor correction circuit, the kinds of active power factor correction circuit principle and L6562 components of