51单片机控制基于1602液晶显示 电子时钟【带闹铃和整点报时】.docVIP

#includereg52.h #define uchar unsigned char #define uint unsigned int uchar code table[]=2010/01/01 Sun; uchar code table1[]=00:00:00; sbit lcden=P2^7;//使能控制 sbit rs=P2^6;//数据/指令选择端 sbit rw=P2^5;//读写选择端 sbit set=P1^0;//时间设置按键 sbit set1=P2^0;//闹钟设置按键 sbit k1=P1^1; //递增按键 sbit k2=P1^2; //递减按键 sbit reset=P1^3;//从设置中跳出来 sbit buzz=P1^5; //蜂鸣器控制端 uchar code week0[]=Sun; uchar code week1[]=Mon; uchar code week2[]=Tue; uchar code week3[]=Wed; uchar code week4[]=Thu; uchar code week5[]=Fri; uchar code week6[]=Sat; uchar num,num1,aa,bb1,bb2,cc,year,months,day,week,shi,fen,miao,knum; uchar year1,months1,day1,week_1,shi1,fen1,miao1;//闹钟变量定义 void keyscan(); //按键程序 void time_keyscan(); void keyscan_1(); //按键程序 void time_keyscan_1(); void delay(uint z) { uchar x,y; for(x=z;x0;x--) for(y=110;y0;y--); } void delay1(void) { ;;} void buzz_pro(uchar be)//蜂鸣器发声函数 { switch(be) { //uint i; /*用于整点响铃*/ case 0:{ buzz=~buzz; //delay1(); }break; /*用于闹铃报时*/ case 1:{ buzz=~buzz; //delay(10); }break; } } void write_com(uchar com)//命令写入函数 { rs=0; delay(3); P0=com; delay(3); lcden=1; delay(3); lcden=0; } void write_date(uchar date)//数据写入函数 { rs=1; delay(3); P0=date; delay(3); lcden=1; delay(3);//这里至少为3 lcden=0; } void init() //初始化时钟函数 { rw=0; write_com(0x38);//设置显示模式 write_com(0x0c);//设置显示开关及光标 write_com(0x06);// write_com(0x01);//清屏 write_com(0x80+1);// 设置数据起始地址 for(num=0;num14;num++) { write_date(table[num]); delay1(); } write_com(0x80+0x44); for(num=0;num8;num++) { write_date(table1[num]); delay1(); } TMOD=0x01; TH0=(65536-49970)/256; TL0=(65536-49970)%256; EA=1; ET0=1; // TR0=1; } void write_sfm(uchar add,uchar date)//秒分时写入子程序 { uchar sh,ge; sh=date/10; ge=date%10; write_com(0x80+0x44+add); write_date(0x30+sh); write_date(0x30+ge); } void write_ymd(uchar add,uchar date)//年月日写入子程序 { uchar sh,ge; sh=date/10; ge=date%10; write_com(0x80+add); write_date(0x30+sh); writ