利用SolidWorks进行单作用叶片泵设计及其有限元分析-本科.docVIP

摘要 液压泵是随着液压传动技术的产生而产生的，随着我国工业和科学技术的不断发展，机、电、液一体化在整个机械行业所占的比重越来越大，液压传动技术在诸多领域得到了越来越广泛的应用，因此，液压泵作为动力元件成为液压传动元件中不可缺少的一部分，起到非常重要的作用，同时越来越受人们的关注。 单作用叶片泵作为液压泵的一种，在液压传动系统中有较为广泛的应用。基于单作用叶片泵的应用范围和优缺点，本文主要对单作用叶片泵做了从结构设计到部分结构性能分析的工作。其主要过程是通过现有工况确定单作用叶片泵主要的零件尺寸，然后通过SolidWorks软件对单作用叶片泵进行三维实体建模和虚拟装配。再对装配体中叶片的运动进行运动学分析和装配体进行动力学分析，最后对转子的静态应力进行有限元分析。整篇论文对于单作用叶片泵的设计具有参考和实用意义，同时也对单作用叶片泵的优化具有一定的指导作用。 关键字：单作用叶片泵，有限元，优化设计 Abstract Hydraulic pump is produced with hydraulic transmission technology, With the continuous development of industry and science and technology in our country, machine, andelectric, iquid integration in throughout machinery industry by accounted for of share increasingly big.Hydraulic drive technology get has increasingly widely of application in many area.So hydraulic pump as power components became hydraulic drive components in the not missing of part, up to very important of role, while increasingly by people of concern. Single-acting vane pump as a hydraulic pump.There are used in hydraulic transmission system more and more.Based on the scope of application of the single-acting vane pump and the advantages and disadvantages.This article focuses on single-acting vane pump part made from structural design to structural analysis. Its main processes are determined by existing conditions of single-acting vane pump parts dimensio. Through SolidWorks software for single-acting vane pump for three-dimension solid modeling, and virtual Assembly.Assembly blade motion in kinematics analysis and Assembly dynamics analysis, static finite element analysis of the stress of the last rotor. Papers for the design of single-acting vane pump with references and practical significance, as well as optimization of single-acting vane pump capable of guiding. Keywords: single-acting vane pump; finite; optimal design 目录 摘要 I Abstract II 目录 III 1 绪论 1 1.1 课题研究背景 1 1.1.1 CAD技术的发展 1 1.1.2 SolidWorks软件简介 1 1.1.3 单作用叶片泵简介 3 1.2 课题研究的目的与意义 4 1.3 课题研究的内容 5 2 单作用叶片泵结构的设计及尺寸参数的初定 6 2.1 单作用