HD44780源程序.docVIP

/* LCD 型号：HD44780???????*//*打印机型号： EPSON M311???*/#include <reg51.h>#include <absacc.h>#include <intrins.h>#define??uchar?????unsigned char#define??uint??????unsigned int???????????????????????????????????//定义8255I/O端口地址#define??PCC8255???XBYTE[0x007f]???//8255命令口地址#define??PC8255????XBYTE[0x007e]???//8255的PC口地址#define??PB8255????XBYTE[0x007d]???//8255的PC口地址#define??PA8255????XBYTE[0x007c]???//8255的PC口地址sfr??????RPCTL??????= 0xD8;sbit?????RPCTL_5????= RPCTL^5; sbit?????LS164A?????= P2^5;sbit?????LS164cp????= P2^6;sbit?????Print_busy = P3^3;sbit?????IC_RST?????= P1^1;sbit?????IC_CLK?????= P1^0;sbit?????IC_IO??????= P1^2;sbit?????IC_PGM?????= P3^2;uchar code table1[16]="FEDCBA9870123456";uchar code table2[16]="0000123456789ABC";void??INIT_8255(void);????????????/*初始化8255*/void??LcdInit(void);??????????????/* LCD初始化函数 */void??LcdCmd(uchar);??????????????/* LCD控制命令函数 */void??LcdData(uchar);?????????????/* LCD数据输入函数 */void??LcdClr(void);???????????????/* LCD清屏函数 */void??LcdStr(uchar *);????????????/* 显示字符串函数 */void??LcdDisp(uchar x,uchar d);void??Delay_msec(uint x);?????????/* 延时函数 */uchar Getkey(void);???????????????/*键盘函数 */void??PrintInit(void);????????????/*打印初始化函数*/void??PrintData (uchar??d);???????/*打印函数*/void??PrintString(uchar *p);??????//打印字符串void LcdDisp(uchar x,uchar d)????//指定位置显示字符 x:LCD位置 d:字符{??if(x<9)??{?????LcdCmd(0x80 + x);?????LcdData(d);??}??else??{?????LcdCmd(0xc0 + x);?????LcdData(d);??}}void LcdStr(uchar *p)????????/* 显示字符串函数 */ { ???data uchar i;???LcdCmd(0x80);?????????????//设置显示数据RAM???for (i=0;i<=7;i++)???{????????LcdData(*p);?????????/* char of LCM */????????p++;???}??????LcdCmd(0xc0);?????????????//设置显示数据RAM???for (i=0;i<=7;i++)???{????????LcdData(*p);????????/* char of LCM */????????p++;???} }void??LcdClr()???????????????/* LCD清屏函数-----通过送0x20清屏*/{ ???data uchar i;???LcdCmd(0x80);?????????????//设置显示数据RAM???for (i=0;i<=7;i++)????????LcdData(0x20);????????/* char of LCM