马达IP防护等级.docVIP

符號 等級 防護規格 防護對象 第一個數字對外來固體物的保護X 不指定 不指定 0 無保護 無 1 ≧50mm 手背無法接觸危險部位或零件 2 ≧12.5mm 手指無法接觸危險部位或零件 3 ≧2.5mm 工具無法接觸危險部位或零件 4 ≧1.0mm 電線無法接觸危險部位或零件 5 防塵 電線無法接觸危險部位或零件 6 密封防塵 電線無法接觸危險部位或零件 第二個數字對外來水的保護X 不指定 　 0 無保護 　 1 垂直水滴 　 2 防護罩傾斜15。水滴 　 3 灑水 　 4 潑水 　 5 噴水 　 6 強壓噴水 　 7 短時間浸水 　 8 連續性浸水 　 Using Ingress Protection (IP) Ratingsto help select proper equipment for your application For load cell sealing techniques, Rice Lake Weighing Systems uses the Ingress Protection (IP) rating system. We find the IP numbers and their definitions are suitable for a classification of load cells and only apply IP numbers to such cells. The IP numbers on a load cell further specify the treatment a specific cell can endure in environments more severe than simple washdown. The following table defines the IP numbers. Example: Protection level offered by an IP 67 rated protected product 6 = Totally protected from dust7 = Protected from the effects of immersion between 15cm and 1mProtection against solid objects First Number 0 No protection 1 Protected from solid foreign objects of 50 mm and greater (e.g., accidental touch by hands) 2 Protected from solid objects of 12 mm and greater (e.g., fingers) 3 Protected from solid objects more than 2.5 mm (e.g., tools and small wires) 4 Protected from solid objects more than 1 mm (e.g., small wires) 5 Protected from dust; limited entrance (no harmful deposit) 6 Totally protected from dust Protection against liquids Second Number 0 No protection 1 Protected from vertically-falling drops of water (e.g., condensation) 2 Protected from direct sprays of water up to 15° from vertical 3 Protected from direct sprays of water up to 60° from vertical 4 Protected from water sprayed from all directions; limited entrance allowed 5 Protected from low pressure jets of water from all directions; limited entrance allowed 6 Protected from strong jets of water (e.g., for use on ship decks);