PSQ角行程智能型电动执行机构-上海高特自动化仪表厂.docVIP

PSQ 角行程智能型电动执行机构 PSQ quarter-turn intelligent electric actuator 概述 PSQ型执行机构是德国 PS Automation GmbH 执行机构生产商推出的产品。PSQ系列角行程电子式一体化电动执行机构，体积小、重量轻、功能强、智能操作器内装、操作方便。PSQ系列角行程电动执行机构，以90°角行程输出力矩为50Nm-700Nm，适用于90°旋转阀门（如球阀、蝶阀）和风门开关或调节控制。 Introduction PSQ actuator is produced by German PS Automatic GmbH actuator manufacturer. PSQ quarter-turn electronic-integral actuator is small, light and easy to operate. Equipped with intelligent manipulator, it is easy to operate. It outputs torque with 90皅uarter-turn, and it is usually used as switch and control of 90癱hangeover valve.(elBall valve, butterfly valve) 产品特点 Product characteristics 一体化结构设计，位置变送器和伺服放大器做为两个独立部件均可直接装入执行机构内部，直接接受4-20mA控制信号，输出4-20mA或1-5VDC阀位反馈信号，具有自诊断功能，使用和调校十分方便。 With integral structure design, position transmitter and servo amplifier can be installed inside the actuator, receiving 4-20mA control signal and exporting 4-20mA or 1-5VD valve position feedback signal. Because of self-diagnosis function, it is easy to operate and control the machine.2、功能模块式结构设计，通过不同可选功能的组合，实现从简单到复杂的控制，满足不同应用要求。 With functional module design, the machine combines different alterative function to achieve control and satisfy kinds of requirements. 3、结构简单，体积小巧，重量轻，便于安装和维护，机械零件全部采用CNC加工制作，工艺精湛。 With simple structure, small size and light weight, it is easy to install and maintain. All spare parts are manufactured with CNC technology.4、传动全部采用小齿隙密封齿轮，具有效率高、噪声低、寿命长、稳定可靠、无需加油，多种运行速度，可满足各种控制系统的要求，以保证系统的快速响应及稳定性 Transmission all uses small backlash sealed gear, ensuring high efficiency, low noise, long life and reliable stability. Refueling is not needed. A variety of operating speed meets requirements of different control system to make sure that the system responds quickly and firmly.5、PSQ系列有转矩开关保护，可防止因阀门产生过大转矩而损坏阀杆。 PSQ system is protected with torque switch to make sure that the valve rod is not damaged as the valve generates overlarge torque.6、驱动电机采用高性能稀土磁性材料制作的高速同步电机，运行平稳。具有体积小、力矩大、抗堵转、控制精度高等特点。 Driving motor is high-speed synchronous ma