模具专业毕业论文外文翻译-精密体积成形模具的设计制造及发展精选.docVIP

Volume precision forming mold design and manufacturing and development Auxiliary processing technologyIn the production process, improve die life is a complex comprehensive issues. All forging process, especially the net shape and approximate net form processing technology Much depends on the accuracy and quality, depending on the technology level of mould. Mould technology reflected in moulding design and manufacturing, And die life with the above two links in the outside, still and use the link. Improve die life is of great economic benefits, generally in the trial production mold tooling cost accounting for stage production cost of about 25%, and finalize the design production is only 10%. Die early failure forms, many for the punch and die of fracture bore edge collapse, flash in the bridge chap, cavity occurred crack at the bottom. Many factors influence the life of die a wide range and die design the life of die is based. Die design link is refers to the mould structure plan, set Forming design and determine the cavity of the steel, mould hardness etc. Mould manufacturing process is to point to die making technology, heat treatment standard and surface treatment technology, etc. In this paper, only from the mold design and die manufacturing two aspects to study and improve the life of die measures. 1, the reasonable design precision volume forming a (fine forging) Die forgings should try to avoid with holes, narrow slot, Angle, shape should as far as possible is symmetrical, even if they cant do axisymmetric, also hope to achieve, Under symmetrical or left, right symmetry. To design mold pulling out rake, avoid stress concentration and die forging units, increasing the pressure overcome eccentric loading and mould wear not equal defect. For forging die cavity edge and bottom fillet radius R, design should ensure forgings cavity is easily filled with the premise of amplification. If the fillet radius is too small, easily cavity edge in high temperature and high