OSE 切断阀英文资料.pdfVIP

Instruction Manual Type OS2 Form 5668 March 2001 Type OS2 Slam-Shut Device Introduction TYPE OS2 Scope of Manual SLAM-SHUT DEVICE This instruction manual provides installation, mainte- nance, and parts information for the Type OS2 slam- shut device used on the Type EZROSX and the Type OSE. Description TYPE E The purpose of the Type OSE/EZROSX slam-shut VALVE device is to totally and rapidly cut the flow of gas when BODY the inlet and/or outlet pressure in the system either exceeds or drops below setpoints. The Type OS2 consists of a valve, mechanism box (BM1 or BM2) and W8133 either one or two modular sensing elements called TYPE OSE manometric devices (BMS1 or BMS2) (see figure 2). Type EZROSX (see figure 1) is a combination of the Type EZR regulator and the Type OS2 slam-shut device. For installation, maintenance, and parts information on the Type EZR portion, refer to Type EZR Instruction Manual Form 5468. All information for the Type OSE (which includes a Type OS2 slam-shut device and a Type E valve body) is contained in this instruction manual. The detection of pressure variances is sensed by a double stage trip mechanism (see figure 7). The first stage is the detection stage and will only trip when the TYPE EZR system pressure rea