TEMS分析简介.pptVIP

10/19/00 Purpose of Drive Test -Verify the RF coverage plan -Fine tune the radio predication model. -Check integration of new sites -Handovers -Interference levels (C/I ) -Audit competitor network Checking Layer 3 Message for missing neighbors Drive Test notification -When testing a new site, take a round-circle using the site as center-point. -It’s not a coverage-test, stop at the problem-spot for investigation if possible. -Drop down the environmental condition influencing the RF propagation. -Go through the same road in both direction. -Realize the rule of handover between two cells. -For