官方说明书intersil X9118 说明书.pdf

X9118 ® Dual Supply/Low Power/1024-Tap/2-Wire Bus Data Sheet January 18, 2008 FN8161.3 Single Digitally-Controlled (XDCP™) Features Potentiometer • 1024 Resistor Taps – 10-Bit Resolution The X9118 integrates a single digitally controlled • 2-Wire Serial Interface for Write, Read and Transfer potentiometer (XDCP) on a monolithic CMOS integrated Operations of the Potentiometer circuit. • Wiper Resistance, 40Ω Typical @ 5V The digital controlled potentiometer is implemented using 1023 resistive elements in a series array. Between each • Four Non-Volatile Data Registers for Each Potentiometer element are tap points connected to the wiper terminal • Non-Volatile Storage of Multiple Wiper Positions through switches. The position of the wiper on the array is • Power On Recall: Loads Saved Wiper Position on controlled by the user through the 2-wire bus interface. The Power-Up potentiometer has associated with it a volatile Wiper Counter Register (WCR) and a four non-volatile Data Registers that • Standby Current 3µA Max can be directly written to and read by the user. The contents • System VCC: 2.7V to 5.5V Operation of the WCR controls the position of the wiper on the resistor array though the