RationalDMIS V6.5三坐标测量软件虚拟三坐标测量机软件.docx

ACR3 installation and user's guide Document part number H-1000-5087-02-A ACR3 Care of equipment Renishaw probes and associated systems are precision tools used for obtaining precise measurements and must therefore be treated with care. Changes to Renishaw products Renishaw reserves the right to improve, change or modify its hardware or software without incurring any obligations to make changes to Renishaw equipment previously sold. Warranty Renishaw plc warrants its equipment for a limited period (as set out in our Standard Terms and Conditions of Sale) provided that it is installed exactly as defined in associated Renishaw documentation.Prior consent must be obtained from Renishaw if non-Renishaw equipment (e.g. interfaces and/or cabling) is to be used or substituted. Failure to comply with this will invalidate the Renishaw warranty. Claims under warranty must be made from authorised Service Centres only, which may be advised by the supplier or distributor. Patents Features of Renishaw’s ACR3 autochange rack system and associated equipment are the subjects of the patents and patent applications listed below: EP 0142373 EP 0293036 EP 0243766 EP 0388993 EP 0392660 EP 0392699 EP 0544854 EP 0501710 EP 0750171 EP 0826136 EP 242747 B EP 548328 B ??JP 2,098,080 JP 2,510,804 JP 2,545,082 ??JP 2,539,824 ??JP 2,994,422 ??JP 3,018,015 JP 3,101,322 JP 501,776/1994 ??JP 503,652/1994 JP 505,622/1999 US 4651405 ??US 4813151 ??US 4817362 US 5,084,981 US 5,088,337 ??US 5,339,535 ??US 5,323,540 US 5,345,689 US 5,404,649 ??US 5,505,005 ??US 5,918,378 TW UM-099300 ACR3 EC DECLARATION OF CONFORMITY EC DECLARATION OF CONFORMITY Renishaw plc declare that the product: - Name: ACR3 Description: Autochange rack Part no. A-5036-0005 Complies with directive: 2006/42/EC Machinery Complies with standards BS EN 292-1:1991+ A1:2009 Safety of machinery - Basic concepts, general principles for design: - BS EN 292-2:1991+ A1:2009 Part 1. Basic terminology, methodology. Part 2. Technical principles