毕业设计论文-基于UG的三轴铣床运动仿真.docVIP

毕 业 设 计 说 明 书 基于UG的三轴铣床运动仿真 基于UG的三轴铣床运动仿真 摘要：铣床是一种应用广泛的机床，铣床除能铣削平面、沟槽、轮齿、螺纹和花键轴外，还能加工比较复杂的型面，效率较刨床高，在机械制造和修理部门得到广泛应用。otion simulation of three-axis milling machine based on UG Abstract:Milling machine is a widely used machine, Milling machine can mill plane, groove, teeth, thread, spline axis, and more complex surface machining . Its higher efficiency than the planer , it has been widely used in the machinery manufacturing and repair sector . The project is designed to achieve a linkage axis milling machine, and using motion simulation by UG. Analysis of machine tool motion simulation has become an important adjunct in theMachine tool design process.This simulation can be used to detect the existence of the movement interference, design issues such as unreasonable. This can be resolved in time for the machine tool manufacturers, to avoid spending huge cost. Firstly,in this paper,it introduces a brief subject sources, classification and development process of milling. Secondly, it makes the overall design of three-axis milling machine, determines the size and location of each part and checks them between.,Confirm a simple motion model and motion simulation by UG software. Finally, it concluds remarks and prospects of the computer simulation in the design of future machines.This issue is related to mechanical and computer technology research projects, In this paper, application of UGNX software and the overall structure of milling machines has be explored,it accumulats some experience in design and development of machine tools . Key words：Three-axis milling machine;UG; Motion simulation 目录 1.绪论 1 1.1简介: 1 1.2发展历程: 1 1.3国内外现状综述： 1 1.4主要分类: 2 2.铣床机械部分设计 4 2.1 总体设计要求 4 2.2 运动轴的布置 4 2.3 运动部件的行程范围 4 2.4导轨的选择 4 2.5联轴器的选择 5 2.6铣削力的计算 5 2.6.1主轴电机的选择 6 2.6.2X、Y轴铣削力的计算 6 2.7步进电机的选择 7 2.7.1步进电机应用中的注意事项 7 2.7.2步进电机三因素的选择 7 2.7.3步进电机参数的计算选择 8 2.8滚珠丝杠的选择 8 2.8.1滚珠丝杠的选择计算 9 2.8.2滚珠丝杠的校核 10 2.9轴承的选择 11 3.运动仿真 16 3.1建模 16 3.2装配 16 3.3创建机床运动模型 18 3.3.1定义机