德国易福门(IFM)电子样本--ogh200uk.pdfVIP

Operating instructions Diffuse reflection sensor with background suppression UUKK OGH2xx 0 0 / 0 0 2 H G O Functions and features The diffuse-reflection sensor detects objects and materials without contact and indicates their presence by a switched signal. Range: see type label. Installation Align the photocell and fasten to a mounting device. 1 2 1: LED 2: Setting potentiometer The objects to be detected are to move tranversally to the lens of the unit. In case of other directions of movement it should be tested before whether safe function- ing is guaranteed. Electrical connection Disconnect power before connecting the unit as follows: 2 Adjustment 1 2 1: LED 2: Setting potentiometer UK ►Set the potentiometer to the smallest sensing range. ►Place the object to be detected within the sensing range. ►Increase the sensing range until the LED lights (= minimum value; object detected). ►Remove the object from the sensing range (LED goes off). ►Increase the sensing range until the LED lights (= maximum value; background detected). ►Set the sensing range to the medium position between minimum and maximum value. Operation Check the safe functioning of the sensor. • The output is switched / the yellow LED is lit when the object is detected. Maintenance Keep the lens of th sensor free from soiling. For cleaning do not use any solvents or clean