(修改2017.4.6)基于计算机控制技术的制浆造纸工业发展研究.docVIP

(修改2017.4.6)基于计算机控制技术的制浆造纸工业发展研究 基于计算机控制技术的制浆造纸工业发展研究 摘要：本文以计算机控制技术CIPS为基础，对制浆造纸工业的发展进行了研究。分析了计算机控制技术CIPS在制浆造纸工业中的特点和需求，包括综合管理、过程控制、清洁生产三方面，并对造纸工业CIPS技术体系结构进行分析，CIPS的体系结构由制造执行系统MES、企业资源计划ERP、过程控制系统PCS组成，CIPS的网络为三级网络，系统组成包括车间实时网、工厂和下属机构局域网、公司主干网。在制浆造纸工业中，通过计算机控制技术CIPS的先进控制，可使系统运行的工况达到最佳，这有利于产品质量的提高，并可减少装置造成的污染。采用CIPS技术对故障进行诊断，通过CIPS技术能确定制浆造纸工业中仪表设备当前的变化趋势和状态，可随时监测仪表设备的损坏状况，确定维修的区域、方案和时间。 关键词：计算机；制浆；造纸工业；控制技术 中图分类号：TS7 文献标识码：A Research on the development of pulp and paper industry based on computer control technology Abstract: In this paper, the development of pulp and paper industry is studied based on computer control technology CIPS. CIPS analysis of the characteristics and requirements of computer control technology in the pulp and paper industry, including integrated management, process control, clean production in three aspects, and the technical architecture of CIPS papermaking industry were analyzed, the architecture of CIPS by MES manufacturing execution system and enterprise resource planning ERP, process control system composed of PCS, CIPS network for the three level network, the system consists of real-time workshop network, factories and subsidiaries, LAN backbone companies. In the pulp and paper industry, through the advanced control of computer control technology CIPS, the system can run the best operating conditions, which is conducive to the improvement of product quality, and can reduce the pollution caused by the device. To diagnose the fault by using CIPS technology, CIPS technology can determine the pulp and paper industry equipment current trends and status, could be used to monitor the damage condition of instrument, determine the maintenance area, plan and time. Key words: computer; pulp; paper industry; control technology 1引言 随着科技的快速发展，计算机控制体系也发展的越来越快，并成为工业应用中一项重要的技术[1-3]。随着对技术的持续创新与改革，对系统的要求也越来越高，这就要求计算机控制系统要不断的发展和完善[4]。提高计算机控制系统，要自动化控制为基础，先进技术为依托。运用计算机控制技术，能对生产结构进行有效优化，同时可将公司生产规模扩大，使企业生产效率得到提高[5]。