年入洗能力240万吨矿井型选煤厂设计.docVIP

摘 要 煤炭在中国能源中占有重要地位，在选煤厂的新建、改建、扩建中，要不断的优化选煤工艺，合理选择先进的选煤设备，确定合理的厂房车间布置，以及选择适合于选煤厂的管理方法等等，都将提高选煤效益，建设节约高效的选煤厂，都将不断的弱化这些问题。 本设计所用的资料为河南煤化工集团赵固二矿提供的煤质筛分、浮沉资料。首先对收集的煤质资料的审查、校正和综合，得到可选性曲线。然后根据可选性初步确定工艺流程，计算数质量流程、介质和水流程平衡，选择合适的设备。最后依据设备选用情况和设备联系图，对各个车间进行布置，并对总的工业场地进行总体规划。另外，本设计还对生产辅助设施、环保等方面进行了阐述。 本设计根据煤质特点和动力煤洗选特点：选用+13mm重介浅槽，13～0.5mm有压三产品重介旋流，小于0.5mm煤泥直接浮选流程。对应不同粒级、不同可选性确定不同洗选方法，避免了煤泥浮选成本高的问题，并对出现的难选及较难选煤有适应性。 关键词: 选煤工艺流程；重介浅槽；有压三产品重介质旋流器  Abstract Coal in Chinas energy occupies an important position,In the new coal preparation plant, alteration, extension, it is necessary to continuously optimize the coal preparation process, a reasonable choice of advanced coal preparation equipment, determine a reasonable layout of the factory workshop, and choose suitable for coal preparation plant management methods, and so on, down Improve the efficiency of coal preparation, construction, conservation and efficient coal preparation plant, will keep weakening these issues. The design of data used for coal in Henan Coal and Chemical Industry Group Co., Ltd. Zhaogu the coal preparation plant to provide screening, the first coal quality data collected by the review, correction, and comprehensive, are optional curve. Based on a preliminary set of optional process, the calculations of the quality processes, media and water flow balance, choice of appropriate equipment. The final selection based on equipment and associated equipment plans, conduct workshops on various layout and industrial sites in the overall plan. In addition, the design of production facilities, environmental protection, and other aspects of the quota on. According to the design characteristics of coal and steam coal washing characteristics: +13mm re-selected shallow trough, 13~0.5mm pressure three-product-swirl, less than 0.5mm slime direct flotation process. Tablets of the different level and different set of optional washing different ways to avoid the high cost of coal flotation of the