工厂模型生成LC仿真-外文翻译.docxVIP

  • 2
  • 0
  • 约2.58万字
  • 约 21页
  • 2018-06-10 发布于浙江
  • 举报
工厂模型生成LC仿真-外文翻译

Plant Model Generation for PLC SimulationHyeong-TaeParkAbstract:This paper reports an automated procedure for constructing a plant model for PLC simulation. Since PLC programs contain only the control logic without information on the plant model, it is necessary to build the corresponding plant model to perform the simulation. Conventionally, a plant model for PLC simulation has been constructed manually, which requires much effort and indepth knowledge of the simulation. As a remedy for this problem, we propose an automated procedure for generating a plant model from the symbol table of a PLC

文档评论(0)

1亿VIP精品文档

相关文档