输气管道输气管道工程初步的设计.docxVIP

本科毕业设计（论文）题目：新京输气管道工程初步设计2013年 6月13日新京输气管道工程初步设计摘 要本输气管道设计项目是新京输气管道工程，管道全长3441km，设计输量每年200亿立方米。通过程序RealPiep模拟仿真，确定最优方案，并以最优方案为例进行设计计算。最优方案为：末段管长377，管径1219mm，壁厚16mm，有内涂层，共有14座压气站，15座清管站和114座截断阀室，总投资487.43亿元。全线采用等强度设计原则，管道钢材材质为X80钢。目前天然气管网系统不断建设和相互连接成网，输气管道的设计计算、工况变化日益繁琐，个别异常工况的出现必将影响输气管网的安全运行。本文阐述了干线输气管道设计的基本原理和一般方法，本文主要介绍了天然气的物性计算；输气管道的水力计算；技术经济分析；管路布站方案计算；有无内涂层的压降和储气情况。关键词：长输管道；RealPipe软件；布站方案；站场工艺计算The preliminary design on the Xinjing Natural Gas Pipeline ProjectAbstractThe gas pipeline project is the xinjiang-bejing Natural Gas Pipeline Project, the pipe length of 3441km, the design transmission capacity of 20 billion cubic meters per year.Through a simulation program RealPip, determine the optimal plan and design the best program as an example. The optimal solution is: the last paragraph of tube length 377km, diameter 1220mm, wall thickness of 16mm, with the inner coating, with 14compressor stations, 15 pigging stations and 114 block valve chamber and total investment is RMB 487.43 billion. Across the board with the principles of strength design, pipeline steel material for X80 steel. Currently building the natural gas pipeline system and connected into a network, design and calculation of gas pipeline, operating conditions are increasingly burdensome and individual appearance of abnormal working conditions will affect the safe operation of gas transmission network. Trunk gas pipeline design was elaborated the basic principles and general methods, this article focuses on the calculation of physical properties of natural gas;Hydraulic calculation of gas pipeline;Calculation of gas storage capacity;Technical and economic analysis;Guan Lubu calculation;Starting, phase I, phase II under the condition of power on the programme and the corresponding pressure drop curve;There is no Undercoat of pressure drop and air condition.Keywords: Long-distance pipeline; RealPipe software; Station layoutprogram; Technology design of the station第1章前言天然气是一种优质、高效、清洁的能源和化工原料。进入20世纪7