数控直流稳压源设计报告.docVIP

数控直流稳压源设计报告 A-3数控直流稳压电源设计 组员：郭江、袁强、周偲 完成时间：2016年5月9日 摘要 随着人们生活水平的不断提高,数字化控制无疑是人们追求的目标之一,它所给人带来的方便也是不可否定的,其中数控直流稳压电源就是一个很好的典型的例子，但人们对它的要求也越来越高,要为现代人工作、科研，生活、提供更好的，更方便的设施就需要从数字电子技术入手，向智能化方向发展。 本设计在输入电压为10V-16V，电流不小于5A的条件下，完成一个直流稳压、恒流电源。该电源达到了输出电压1-22V可调、电压增减调节，电压步进0.5V、纹波小，输出电流不小于1A、恒压源效率大于70%。 关键词：Buck-Boost电路、数控、稳压电源。 Abstract With the continuous improvement of people#39;s living standard, digital control is undoubtedly one of the people#39;s pursuit of the goal, it gives people the convenience is undeniable, the NC DC regulated power supply is a very good typical examples, but people#39;s requirement of it is also more and more high, to modern work, scientific research, life, to provide better, more convenient facilities requires from the digital technology of intelligent direction. The design of the input voltage is 10V-16V, the current is not less than 5A, the completion of a DC voltage regulator, Heng Liu power. The power supply reaches the output voltage 1-22V can be adjusted, the voltage increase or decrease, the voltage step 0.5V, the ripple is small, the output current is not less than 1A, the constant pressure source efficiency is more than 70%. Key words: Buck-Boost circuit, digital control, voltage regulated power supply. 目录 一、 任务及要求 ....................................................................................................................... 4 1、基本要求 ........................................................................................... 错误！未定义书签。 2、发挥部分 ........................................................................................... 错误！未定义书签。 二、 方案论证与设计 ............................................................................. 错误！未定义书签。 三、 原理分析与计算 ............................................................................. 错误！未定义书签。 1、Boost变换器基本原理 .................................................................... 错误！未定义书签。 2、主电路主要元器件的参数设计 ..............