浅析长安金矿次生构造及脉岩体穿插发育背景下后期成矿控制因素.docVIP

浅析长安金矿次生构造及脉岩体穿插发育背景下后期成矿控制因素 　　摘要：长安金矿属构造蚀变型金矿，以F6、F10断裂破碎带控制为主，其奥陶系下统向阳组二段第三层（O1x2—3）为主要含矿地层，厚度约150m。矿体呈脉状、透镜状产出，近似南北走向，倾角上缓下陡，局部出现反倾、倒转态势。从区域矿源层发育的系列斜交、垂直、水平等组合的次级构造裂隙以及贯入、充填、交代、蚀变的脉岩体特征，表明后期成矿流体分布带受挤压、切错、叠加及再造富集作用激烈，其形态极其不规则，见分支、侧现、三角网状现象展布。矿山进行次生构造及脉岩体种类、性质、组合、接触关系、产状及分布规律的剖析，有助于矿体赋存、成因等深入认知。从而，圈定符合区域地质规律的矿层，为资源评价提供可靠的基础实体。 　　 　　关键词：次生构造、脉岩体、穿插接触、后期成矿控制因素 　　Abstract: The Changan gold deposit belongs to structural alteration type gold deposit, with F6, F10 fracture zone, the lower Ordovician Xiangyang group two section third (O1x2 - 3) as the main ore-bearing strata, the thickness is about 150m. The ore bodies are vein, lenticular, approximate north-south direction, dip angle on the slow down steep, anti-dumping, reverse the situation locally. From the secondary tectonic fracture series of skew, regional ore source layer development, level and vertical combination of vein rock mass characteristics penetration, filling, replacement, alteration, show that the late ore-forming fluid distribution with extruded, cut the wrong, superposition and reconstruction of enrichment of fierce, their morphology was irregular, spreading branches, side. At present, the phenomenon of triangular mesh. Analysis of secondary structure and vein rock types, properties, composition, contact relationship, occurrence and distribution of mines, contribute to the orebody occurrence, causes and in-depth knowledge of. Thus, the delineation of regional geological regularity of seam, provide the basis for real reliable resource evaluation. 　　Keywords: secondary structure, vein rock, interspersed with contact, the late control factors of mineralization 　　 　　中图分类号：P612 文献标识码：A 文章编号： 　　 　　 　　 次生构造及脉岩体穿插发育 　　采区F6、F10断裂破碎带内，次生构造及???长岩、煌斑岩等脉岩体穿插发育，表明区域构造和岩浆活动频繁，含矿流体运移、富集、成矿阶段均遭受断层及脉岩体的穿切作用。采区次级构造及脉岩体穿插发育部位，围岩蚀变强烈，也是矿带厚大及品位均匀区。可见，次生构造及脉岩体对矿体作用较明显。采区次生构造及脉岩体出露现象是地质二次圈定素描勾绘的重点，工程布置需考虑其岩层面﹑断层及次生构造与脉岩体的展布关系。在连接、追索、圈定矿体时，应梳理相互的接触关系、作用及程度。(附矿区V5矿带分布示意图1-1) 　　 　　二.后期成矿控制因素 　　经区域地质的多期、重叠、交错作用，使