毕业设计（论）-环型塑料件注射模设计（全套图纸）.docVIP

PAGE \* MERGEFORMAT I PAGE \* MERGEFORMAT I毕业设计说明书(论文)题 目： 环型塑料件注射模设计 摘 要本课题主要是针对环型塑料件模具设计，通过对塑料件进行工艺分析和比较，最终设计出一副注射模。该课题从产品结构工艺性，具体模具结构出发，对模具的浇注系统、模具成型部分的结构、顶出系统、冷却系统、注塑机的选择及有关参数的校核，都有详细的设计，同时并简单的编制了模具的加工工艺。通过整个设计过程表明该模具能够达到此塑件所要求的加工工艺，根据题目设计的主要任务是环型塑料件模具设计，也就是该副模具能实现自动化提高产量。针对环型塑件的具体结构，该模具是点浇口一个分型面注射模具。由于塑件外侧有个通孔，固采用斜导柱侧向抽芯结构。关键词：环型塑件 注射模 斜导柱 侧向抽芯全套图纸加153893706AbstractThe main topic for the ring of plastic mold design, plastic parts through process analysis and comparison, the final design of an injection mold. The subject of the process from the product structure, concrete mold structure view, the choice of the die casting systems, structures forming part of the mold, the ejection system, cooling system, injection molding machines and related parameters in check, has a detailed design, while and simple preparation of the mold processes. Through the entire design process indicates that the mold can be achieved in this process required for plastic parts, the main task is to design a ring according to the topic plastic mold design, which is the deputy dies can be automated to increase production. Specific structural ring shape the piece, the mold is a point gate injection mold parting line. Because the outer plastic parts have a through-hole, using solid core pulling angle pin lateral structure.Keywords: ring shape the piece injection molded bevel pillar core pulling sideways目 录TOC \o 1-3 \h \u HYPERLINK \l _Toc32212 前 言 PAGEREF _Toc32212 1 HYPERLINK \l _Toc7844 第一章 绪 论 PAGEREF _Toc7844 2 HYPERLINK \l _Toc28663 1.1 国内外塑料模具技术的现状及发展趋势 PAGEREF _Toc28663 2 HYPERLINK \l _Toc30179 1.2 塑料的注射成型过程 PAGEREF _Toc30179 4 HYPERLINK \l _Toc30431 1.2.1 塑化过程 PAGEREF _Toc30431 5 HYPERLINK \l _Toc31324 1.2.2 注射过程 PAGEREF _Toc31324 5 HYPERLINK \l _Toc24710 1.2.3 模塑过程 PAGEREF _Toc24710 5 HYPERLINK \l _Toc4184 1.3 塑料注塑模具介绍 PAGEREF _Toc4184 5 HYPERLINK \l _Toc32093 1.3.1 塑料模具结构的组成 PAGEREF _Toc32093 6 HYPERLINK \l _Toc5777 1.3.2 料模具结构设计要点 PAGEREF _Toc5