物料自动分检控制系统设计.docVIP

2011 届毕业设计说明书 物料自动分拣控制系统的设计 摘 要 PLC控制是目前工业上最常用的自动化控制方法，由于其控制方便，能够承受恶劣的环境，因此，在工业上优于单片机的控制。PLC将传统的继电器控制技术、计算机技术和通信技术融为一体,专门为工业控制而设计,具有功能强、通用灵活、可靠性高、环境适应性强、编程简单、使用方便以及体积小、重量轻、功耗低等一系列优点,因此在工业上的应用越来越广泛 本文从物料自动分检控制系统的基本原理以及系统构成出发，针对设计一个，实现的自动化以PLC为主控制器,结合装置、传感技术、位置控制等技术,现场控制产品的自动分拣 Abstract Summary : The PLC control is the most commonly used in industrial automation control method, because its convenient control, able to withstand harsh environment, therefore, is superior to the SCM in industrial control. PLC will be traditional relay control technology, computer technology and communication technology integration, designed specifically for industrial control, with powerful function, general flexibility, high reliability, and environment adaptable, with simple programming, use convenient and small volume, light weight, low power consumption, so in a series of advantages in industrial used more widely. In addition, the development of the industrial control configuration software embedded configuration software, especially the emergence of a more flexible, automation control, man-machine interface and the use of the system is enhanced and practicality and class. This article from material automatic sorting control system the basic principle and system structure view of packaging industry boxes process requirement, design a material sorting system for products, automatic detection and sorting, realize the automation product testing sorting. The design process, combining with PLC primarily controller pneumatic device, sensing technology, position control technology, on-site control product automatic sorting. In the control system for the host of PLC control function of the system is rich, at the same time, the paper added to the operating system changes, adopted the entire Chinese industrial control configuration software MCGS, add the man-machine interface implements humanized design and operation, strengthen the system reliability a