土木工程毕业设计论文 绵阳市华阳集团办公楼设计.doc

绵阳市华阳集团办公楼（中文摘要）摘要：本次毕业设计题目为绵阳市华阳集团办公综合楼设计。设计内容包括建筑设计、结构设计。本设计主体为三层(局部四层)；底层高为4.4米，四层高为3.9米，其余层高为3.5米，总建筑面积近为2500平方米，室内外高差为0.90米，本工程设定相对标高±0.000，功能上满足人们智能办公的使用要求，能够充分的利用有限的空间使布局更加合理。本工程采用钢筋混凝土框架结构，建筑抗震设防烈度为7度，基础采用柱下独立基础，楼梯采用板式楼梯。结构计算包括手算和电算两部分，其中手算部分包括：一榀框架的结构计算，该框架相邻的楼板计算，框架柱下基础的计算，楼板计算。电算部分采用PKPM结构设计软件进行分析计算。通过毕业设计，综合应用四年的所学的专业知识，使我的专业水平得到很大提高，为将来的工作打下了坚实的基础。关键词：建筑设计 荷载统计 内力组合 构件设计The Design Of HuanYang Multy Office Building in MianYang（English Abstract） Abstract: The topic of this design is: The Design Of HuanYang Multy Office Building in MianYang, The design contents includes the building design and construct-ion design. This design corpus as three layer, parcels are four layer; The story alt-itude of ground floor is 4.4meters, the four floor is 3.9 meters and the other are3.5meters. The whole building acreage is near to 2500 square meters, the level of ind-oors and outside is 0.90 meter, this engineering sets up the opposite elevation is ±0.000, on the function satisfy request of the people work in. The request of the usage, can make use of the limited space arrange layout more reasonable.This project adopts reinforced concrete frame construction, the building anti-ear-thquake establishes to defend strong degree as 7 degree, foundation adopts the rei-nforced concrete pillar descends the independent foundation, stairs adopts plank type stairs. the calculation of Construction includs calculate with hand and calculate with machine-readable, the part of calculate with hand include: the construction cal-culation of the frame of ping, the calculation of the close floor in that frame knot-hole, the calculation of the pillar under the frame descends pole , the calculation ofthe stairs;The machine-readable part adopts PKPM construction software empolder by Constructs science academy of China proceed the whole three- dimensional sp-ace analysis calculation. Through graduation design, I proceeds my four years' profession knowledge sy-nthesize