VJ31203320激光机常见故障解决方法要点.pdfVIP

VJ3 系列激光机常见故障解决方法汇总 目 录 开机白灯闪烁不停，无法正常进入系统………………………………………………………3 开机白灯闪烁不停，无法正常进入系统，按RESET 键后即正常……………………………3 开机正常，但键盘一直显示waiting for laser ………………………………………………4 开机正常，但键盘显示no connection 20 秒后重新连接…………………………………4 打印过程中出现信息中缺笔画现象，时好时坏……………………………………………….5 开机正常但软件无法连接，保存信息很慢或者死机…………………………………………5 激光漏光………………………………………………………………………………………6 打印变弱………………………………………………………………………………………6 无激光输出， 但无报警………………………………………………………………………6 手持键盘无法进入操作界面，显示两行或三行英文…………………………………………7 机器I/O 信号状态不正常………………………………………………………………………7 W00002 Incomplete marking, product movement too fast …………………………8 E00105 Marking aborted, product movement too fast E00200 Laser not ready……………………………………………………………………8 E00204 General error………………………………………………………………………9 E09002 Marking head: Overpositioning of X mirror……………………………………9 或E09003 Marking head: Overpositioning of Y mirror 或E09004 Marking head: Overcurrent of X mirror 或E09005 Marking head: Overcurrent of Y mirror 或E09006 Marking head: No X mirror connected 或E09007 Marking head: No Y mirror connected E09002 和E09003 同时出现…………………………………………………………………10 1 W00908 Parts of the marking are not within the marking field of the marking head…………………………………………………………………………………………10 E09012Communication error ACC - FM ：MHI: Gaps in the data flow…………11 或E09021 Internal error: Cannot set control mode of the FM ：MHI 或E09022 Internal error: Cannot set configuration mode of the FM ：MHI 或E09101Internal error: Error status of the FM/MHI cannot be reset 或E09102Interrupted communication with marking head E10302Shutter does not stay open………………………………………………………11 或E10303Shutter does not stay closed. E10003Cannot write (all) to the backup of the system database ………………12 E10401 Template invalid …………………………………………………………………12 E10408 The beam shutter does not close………………………………………………12