容错服务器介绍R320a北京捷泰科控科技有限公司.pptVIP

* Active Upgrade removes lockstep operation for OS patch application. One module continues to operate while the other is being updated. After patch application is complete, updated system and data from both modules will be merged. note) Required system down as follows. ?Downtime for application services.　 ?System switch over after the patch application (switch over from the Module #0 to #1) = 10 plus seconds. ?Startup time for the application services.　 * *Key note for this slide* Configuration of FT servers with SAN as NEC Storage. Redundant storage connection as dual paths are available. FT servers offer logical capacity of 300 GB HDD x 8 = 2.4TB (Max) with its internal bays. For clients requiring larger capacity, high reliability NEC Storage D Series is recommended. * * *Key note for this slide* Cluster systems and FT servers have been commonly implemented to provide high reliability and availability. Cluster system: increase availability of a group of servers as a single system FT server : increase availability of a single physical server NEC Express5800 Series servers offer both options. Cluster system = Express5800 Series EXPRESSCLUSTER X FT server = Express5800 / ft series servers　 * *Key note for this slide* 　 The FT server is comprised of redundant components, ensuring operation continuity with one module even if the other module fails. With the hot-swappable module design, operation will not stop from the time of the failure to resynchronization of the replaced module. The Cluster system offers SW failover as well as HW failover. However, it requires the system to be down during the failover process. (a few min. to 10 plus min. of downtime) * *Key note for this slide* FT server benefits over Cluster system: On-going operation during the system failure and the module replacement. Lockstep operation is managed by GeminiEngine, requiring NO special installation or settings. =FT server is recommended for environments demanding exceptiona