毕业设计输电线路导线温度检测跟动态增容系统设计.doc

毕业论文（设计） 题 目： 输电线路导线温度检测及动态增容系统设计 系部名称： 专业班级： 学生姓名： 学 号： 指导教师： 教师职称： 20年月日 中原工学院信息商务学院毕业论文（设计） PAGE \* MERGEFORMAT 32 摘 要 在社会用电量日益增加的今天，如何提高输电线路的输送容量是目前电力部门比较关注的一个问题。本论文从导线温度与输电线路载流量的关系入手，提出了输电线路动态增容的概念，并提出了输电线路动态增容监测系统的思路。通过动态的检测导线温度和环境温度等气象条件分析，确定输电线的输电容量，从而提高导线在一定气象环境下的传输容量。用杆塔监测主分机将导线温度，湿度，风速，日照强度等集中打包为GSM，通过GSM通信模块发送至监测中心。监测中心利用上述信息，结合导线的辐射吸收系数和摩尔根载流量公式计算可允许的载流量，得出了运用动态的检测导线温度和环境气象条件可以提高输电线路的输送容量结论。此外，本次设计软件部分采用单片机C语言进行编程，实现本次设计的控制功能。 关键字：输电线路，传输容量，允许温度，导线应力 The Design of Temperature Testing For Transmission lines and dynamic compatibilizing system Abstract Today the social power consumption growing today by day. One of the currently concern in electricity departmenthow is how to improve the transmission lines transmission capacity . The paper which from the heat and wire transmission lines of the relationship of the carrying capacity puts forward the concept of dynamic compatibilizing transmission lines, and also puts forward the transmission line dynamic compatibilizing monitoring system of thought. Through analysis the dynamic testing temperature and environmental temperature, conductor meteorological conditions .we can determine the transmission wires, so as to improve the transmission capacity in certain meteorological environment . Lord extension with tower monitoring of environmental temperature, humidity, wind speed, sunshine strength for GSM , centralized packaged by GSM communication module sent to the monitoring center. Using the above information monitor center of wires, combined with radiation absorption coefficient and Morgan ampacities allows the formula to calculate the carrying capacity. The test is obtained by dynamic conductor and environmental temperature meteorological conditions can improve the transmission lines transmission capacity conclusion. In addition, the software part of this design adopts single-chip microcomputer C programming language, to make control functions come true. Ke