不同消毒处理对改良型硅橡胶印模润湿性的影响-口腔临床医学专业论文.docxVIP

中文摘要 中文摘要 目的:对3 种改良型亲 71.性硅橡胶印模材料，用 4 种常用消毒液分别浸泡消毒处理 10mìn、30min 、60min 后，评价比较其表面润湿性的变化，为临床应用提供参丐 ·。 材料与方法:对每 一种材料，用同一金属模具各制取 80 个相同的印模，以 20 个为 一组分别接受 2%碱性戊二瞪、 0.5%腆伏、 0.02%二氧化氮、 5.25% 次氯酸铀的浸泡消毒 处理。在每个处理组的 20 个印模中， 5 个不做消毒处理作为对照组， 15 个接受浸泡消 毒处理作为实验组:以 5 个为一组分别浸泡 10m挝、 30min 、60min ，处理完毕后用液滴 法分别测定对照组和实验组的接触角，比较各材料处理前后接触角的变化。 结果:所有材料经浸泡 10min、30min 、6臼nin 后，其接触角与处理前接触角相比较， 均有所增大，在统计学上有显著性差异 (PO.OS)。 结论: 3 种改良型亲水性硅橡胶印模材料经 4 种消毒液不同时间浸泡消毒处理后， 其表面润湿性均有所降低。 关键词:消毒印模材料硅橡胶润湿性 Abstract Abstract Objective: The purpose of this study is to evaluate the changes in the wettability of 3 types of modified hydrophilic sílicone rubber impression materials a白er immersion in 4 kinds of disinfectant solutions in different time interval: 10min，30min and 60min. So it may provide the reference for the clinical application. Materials and methods: The same 80 impressions were made respectively for each type of impression material in the s缸ne metal mould. 80 impressions were divided into 4 groups and were treated with 2% alkaline glutaraldehyde ，0.5% iodophor ，0.02% chlorine dioxide， 5.25% sodium hypochlorite ，respectively. In each group 5 were left untreated as control，15 were treated: every 5 impressions were . immersed for 10min，30min .and . 60mìn 7 respectively. The contact angles were measured through. the Sessile drop method before and after treatment. The changes of the ∞ntact angles were evaluated arid anaIyzed. Results: For each type of impression material，the ∞ntact angles increased significantly after imme时on for 10min，30min and 60min，respectively σ0.05). . Conclusioo: The wettability of 3 types of modified hydrophilic . silicone rubber impression materials decre?sed after immersion in 4 kinds of disinfectant solutions. Key Words: Disinfection Impression material Silicone rubber Wettability II 郑重声明 本人的学位论文是在导师指导下独立撰写并完成的，学位论文没有剿 窃、抄袭、造假等违反学术道德、学术规范和侵权行为，本人愿意承担由此 而产生的法律责任和法律后果，特此郑重声明。 学位论文作者:柳文娟 2004 年 4 月 20 日 引-‘- 引 E司 目前口腔印模材料的种类很多，但由于各自存在的一些不足，使国内外在印模 材料的应用上，主要是