【毕业论文】一种新型静止无功发生器的研究.doc

兰州交通大学毕业设计（论文） 兰州交通大学毕业设计（论文） - PageI - - PageI - [键入文字] 摘　　要 利用静止无功补偿装置实现动态无功补偿的研究是目前电力电子学科中比较新的研究领域之一。本文对新型静止无功发生器进行了较为深入的分析和研究，提出了该控制器的研制方案。 首先，论文比较了现有的无功补偿装置，分析了新型静止无功发生器的优越性能。根据它的动态补偿原理，论文讨论了其补偿性能。 其次，论文还介绍了瞬时无功功率理论及其在无功控制和无功监测方面的应用。研究探讨了一种以配电系统无功功率补偿为主要目标的新型静止无功发生器控制策略。针对配电系统无功功率补偿用静止补偿器的特点。于是，本文设计了一种新型静止无功发生器，克服了传统单片机计算速度慢，精度低等缺陷。 最后，利用MATLAB进行了仿真试验，在MATLAB环境中搭建仿真模型，其仿真结果能够很好地描述新型静止无功发生器的无功补偿性能。通过仿真讨论了其工作过程，验证了理论分析和控制策略的正确性。 关键词：无功补偿；新型静止无功发生器；MATLAB - PageIV - Abstract At present, the research on compensating reactive power using static compensation device is one of the most active areas in power electronics subject. In this thesis, Advanced Static Var Generator is studies and analyzed deeply. The paper proposes design of an Advanced Static Var Generator controller. Firstly, the existing compensation devices are been compared and the superior performance of Advanced Static Var Generator is analysis. In this topic, the compensation performance of that is studied according to dynamic compensation theory. In addition, the paper also describes the instantaneous reactive power theory and its application in reactive power control and reactive monitoring. So studying of a reactive power compensation of distribution system as the main target the Advanced Static Var Generator control strategy. In consideration of the character of that for the reactive power compensation in power distribution system, the paper designs a new Advanced Static Var Generator controller to overcome the traditional single-chip computing slow accuracy and low defects. At last, applying the method of MATLAB to have a simulation for the system. Through setting up simulation models in MATLAB environment and operating the results, which describes the reactive power compensation of Advanced Static Var Generator very well. The simulation to it is processed and the results of simulation proved the correctness of the mathematic model and control strategy. Key Words: Reactive power compensation, New