【AS澳大利亚标准】AS 2505-3-2004 Metallic materials Method 3 Tubular products—Bend and related tests.docVIP

Australian StandardTM  1 AS 2505.3—2004 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 AS 2505.3—2004 Metallic materials Method 3: Tubular products—Bend and related tests PREFACE This Standard was prepared by Standards Australia Committee MT-006, Mechanical Testing of Metals to supersede AS 2503.3—1989, Methods for bend and related testing of metals, Method 3: Tubular products. The objective of this revision is to revise the testing procedure to allow a wider variation in sizes. This Standard is a Method 3 of a series of Standards on the methods of bending wire and related testing of metals. The series comprises the following methods: AS 2505 Metallic materials 2505.1 Method 1: Sheet, strip and plate—Bend tests 2505.2 Method 2: Bars, rods and solid shapes—Bend tests 2405.3 Method 3: Tubular products—Bend and related tests (this Standard) 2405.4 Method 4: Wire—Reverse bend test 2505.5 Method 5: Wire—Simple torsion test 2505.6 Method 6: Wire—Wrapping test METHOD 1 SCOPE This Standard specifies four test methods for determining the resistance of metallic seamless and welded tubes to plastic deformation. NOTE: Criteria for assessment of results of tests are not included; they are set out in appropriate product Standards. 2 DEFINITIONS For the purpose of this Standard, the definitions below apply. 2.1 Test sample A portion of metal or product, or items selected from a batch or group by a sampling procedure. 2.2 Test specimen A portion, or a single item, taken from a test sample for the purpose of applying a particular test. ? Standards Australia Accessed Accessed by UNIVERSITY OF SOUTH AUSTRALIA on 02 Mar 2007 2.3 Test piece A piece taken from each test specimen, and suitably prepared for testing. 3 NOTATION The quantity symbols used in this Standard are listed below. a = wall thickness of tube, in millimetres D = original external diameter of tube, in mi