GH625镍基合金高温压缩变形行为和组织演变.PDFVIP

20 7 2010 7 Vol.20 No.7 The Chinese Journal of Nonferrous Metals July 2010 1004-0609(2010)07-1321-07 GH625 (, 100088) Gleeble−1500D GH625 −2 −1 1 000~1 200 10 ~10 s Q=635.38 kJ/mol, α=0.008 404 MPa−1, n=3.52GH625 0.1 s−1 1 000~1 100 1 200 22.21 µm GH625 ; ; ; ; TG146.1; TG111.7 A Hot compression deformation behaviors and microstructure evolution of GH625 Ni-based alloy WU Zhi-gang, LI De-fu (Beijing General Research Institute for Non-ferrous Metals, Beijing 100088, China) Abstract: The hot deformation behaviors of GH625 nickel-based alloy were investigated by hot compression tests with Gleeble−1500D simulated machine. The true stresstrue strain curves in the temperature range of 1 000−1 200 and −2 −1 strain rate of 10 −10 s were obtained. The true stainstress curves were corrected in consideration of the friction and deformation. The material constants, the activation energy (Q) of 635.38 kJ/mol, α of 0.008 404 MPa−1, and n of 3.52, of high-temperature deformation for GH625 were obtained by the linear regression of peak stress. The constitutive equation of GH625 alloy containing the strain was established through non-linear regression. When the strain rate is 0.1 s−1, the volume fraction of dynamic recrystallization increases with increasing the temperature. The results show that partial dynamic recrystallization can be received when the temperature ranges from 1 000 to 1 100 , and fully dynamic recrystallized structu