电子开料锯在多种工况下的有限元分析与拓扑优化-机械制造及其自动化专业论文.docxVIP

Abst Abstract II II A VARIETY OF OPERATING CONDITION’ FINITE ELEMENT ANALYSIS AND TOPOLOGY OPTIMIZATION OF THE ELECTRONIC PANEL SAW ABSTRACT With the wide application of woodworking products, the research of woodworking machinery industry is also more and more. The electronic panel saw as important wood processing machinery, its main work is cutting sheet metal, the planks accuracy is processed directly affect the subsequent processing quality, and there is still a certain gap relative to the international advanced level and the current level of domestic electronic panel saw. Therefore, doing finite element analysis of electronic panel saws, improve the reliability and accuracy of its work and make the appropriate optimization have great practical significance. In this paper the research main idea of electronic panel saws is as follows: First of all, establishing electronic panel saws geometric model by three-dimensional CAD modeling software Solid Edge, then I import it into HyperMesh software after the necessary simplified, and then divide the finite element mesh, definition of material, cell properties, contact unit and impose constraints and load. Secondly, I imported into the finite element model of ANSYS software, make static analysis of electronic panel saws based on three special conditions, then get the stress and strain of the whole machine and the parts, and verify the reasonableness of its structure. Three special conditions:1,the electronic panel saws processing wood size is 600 × 500 × 18mm， and the processing wood at one end of the workbench; 2, the wood size is 600 × 100 × 18mm，and locatedthe intermediate portion of the workbench; 3, the wood size is 600 × 100 × 18mm, during processing wood board is located in the middle of the workbench and sawn the remaining material for 10mm. Then, using ANSYS software to make modal analysis of the electronic panel saw and get its first twelve-order natural frequency and main vibration mode, and analysis the each