毕业论文设计《毕业设计基于S7-200PLCRS485半双工串口通信》.docVIP

摘 要 本文首先讨论了液压油源的历史背景和对其进行控制的重要意义。在综合考虑近几年液压油源的控制方法及实际应用环境的基础上提出了，基于 S7-200 PLC RS485半双工串口通信，在自由口通讯模式下，对液压油源进行远程控制的方法。 首先讨论了液压油源远程控制系统的技术需求、基本方法，然后着重讨论了，利用 S7-200 PLC RS485半双工串口通信,在自由口通讯模式下，液压油源远程控制的通信功能的需求和实现。实现了PLC 定时连续发送油源状态数据，并随时接收人机界面指令数据的功能。通过试验验证，程序运行可靠，对于油源远程监控计算机来说大部分的时间，只需要处理接收报文命令，节省了计算机资源，实现了液压油源的远程控制功能。 本设计硬件包含：液位传感器，温度传感器，清洁度传感器，液位传感器，液位控制电路，温度控制电路，清洁度报警电路，液位报警电路。软件包含：PLC应用程序和人机界面应用程序。 关键词：油源；远程控制；PLC S7200；人机界面 Abstract This paper first discusses the hydraulic oil source of the historical background and significance of the control. Brings forward the control method considering the recent years hydraulic oil source and practical application environment, half-duplex serial communication based on S7-200 PLC RS485, in the free port communication mode, method for remote control of hydraulic oil source. The first technical demand, remote control system of hydraulic oil source and basic methods are discussed, and then discusses the use of S7-200, PLC RS485 half-duplex serial communication, in the free port communication mode, and realize the communication function of hydraulic oil source remote control requirements. Implementation of PLC timing continuous transmission oil source condition data, and at any time to receive the man-machine interface command data function. Through the test, running reliable, for oil source remote monitoring computer most of the time, only need to deal with the received message command, saves computer resources, to achieve the remote control function of the hydraulic oil source. The design of hardware include: liquid level sensor, temperature sensor, the cleanliness of the sensor, liquid level sensor, liquid level control circuit, temperature control circuit, the cleanliness of the alarm circuit, alarm circuit. The software includes: PLC application and man-machine interface application program. Key words：Oil source；remote control；PLC S7200；man-machine interface 目 录 第1章 绪 论 1 1.1 背景与动机 1 1.1.1 背景 1 1.1.2 动机 1 1.2 意义 1 第2章 设计的方案