TDE MACNO变频器DSC变频器说明书使用手册英文版.pdf

BRUSHLESS DRIVES DSC SERIES User manual TDE MACNO S.p.A Viale Dell’Oreficeria, 41 – 36100 Vicenza, Italy tel. ++39-0444-565444 fax ++39-0444-961999 e-mail: info@tdemacno.it http: // CONTENTS 1. GENERAL SAFETY INFORMATION 1-1 1.1. WARNINGS 1-2 2. CHARACTERISTICS 2-1 2.1. TECHNICAL DATA FOR DSC/DSCT DRIVES 2-2 2.1.1. REGULATING MAGNITUDES 2-2 2.1.2. POWER CIRCUIT (DSC) 2-2 2.1.3. POWER CIRCUIT RATINGS 2-3 3. FIRST INSTALLATION INSTRUCTIONS 3-1 3.1. GENERAL SCHEME OF THE DSC DRIVE CONNECTIONS (3 X 220VAC) 3-1 3.2. GENERAL SCHEME OF DSCT DRIVE CONNECTIONS (3 X 380 VAC) 3-2 3.3. DEFAULT CONNECTIONS 3-3 3.4. KEYPAD 3-4 3.4.1. DESCRIPTION OF KEYBOARD OPERATION 3-4 3.4.2. IDLE STATE 3-4 3.4.3. SETTING AND READING OF PARAMETERS AND CONNECTIONS 3-4 3.4.4. DISPLAY OF INTERNAL MAGNITUDES 3-4 3.4.5. DISPLAY OF I/O AND ALARMS 3-4 3.5. SAVING AND RESETTING PARAMETERS 3-5 3.6. DESCRIPTION OF FONDAMENTAL DATA 3-5 3.6.1. PARAMETERS 3-5 3.6.2. CONNECTIONS 3-5 3.7. GETTING STARTED 3-6 3.8. MALFUNCTIONING WITH ALARM SIGNAL : DIAGNOSIS 3-6 4. ANTI-INTERFERENCE MEASURES 4-1 5. DESCRIPTION OF THE SIGNALS ON THE CONNECTORS 5-1 5.1. CONNECTING CABLE TO RESOLVER (CONNECTOR J4) 5-1 5.2. SERIAL LINE CONNECTOR (CONNECTOR J5) 5-1 5.3. SIGNALS ON THE CONNECTORS 5-2 5.3.1. LOGIC SIGNALS (CONNECTOR J1) 5-2 5.3.2. ANALOG SIGNALS (CONNECTOR J2) 5-2 5.3.3. FREQUENCY INPUT CONNECTOR (CONNECTOR J6) 5-2 5.4. SIGNALS ENCODER EMULATION (CONNECTOR J3) 5-3 6. POWER: CONNECTIONS