一种中心型有限体积孔隙–裂隙渗流求解方法及其OpenMP并行化.PDF

34 5 Vol.34 No.5 2015 5 Chinese Journal of Rock Mechanics and Engineering May 2015 OpenMP ( 100190) OpenMP OpenMP CPU i73770 4.0 CPU i74770 4.2 50% OpenMP O 24 A 2015 A CELL-CENTERED FINITE VOLUME METHOD FOR FLUID FLOW IN FRACTURED POROUS MEDIA AND ITS PARALLELIZATION WITH OPENMP WANG LixiangLI ShihaiMA ZhaosongFENG Chun (Institute of Mechanics Chinese Academy of SciencesBeijing 100190China) Abstract An efficient three-dimensional cell-centered finite volume method(ccFVM) on arbitrary grids was developed for single-phase fluid flow in fractured porous media. The method was parallelized with OpenMP. With that the pressure node was set at the center of the cellthe model of spring-in-series was employed for spatial discretization and the explicit difference scheme for temporal discretization. The dynamic relaxation technique was used for the element-by-element iteration. The numerical tests indicated that the ccFVM was as accurate as FEM but more efficient. The parallel procedure obtained a speedup of 4.0 on the CPU i73770 and a speedup of 4.2 on the CPU i74770. High parallel efficiency of over 50% was achieved on both machines. Key words computational mathematics three-dimensional cell-centered finite volume method single-phase fluid flow in fractured porous media dynamic relaxation technique OpenMP-based parallelization discrete fracture network 1 [1-2] [3] [4]