基于环管试验确定粗骨料膏体充填料浆管道输送参数.docVIP

国家重点研发计划项目（2017YFE0107000） 作者简介：邵亚平（1985-），男，工程师。本科，采矿工程专业，主要从事充填采矿管理及科研工作。E-mail: HYPERLINK mailto:yclql@163.com yclql@163.com 基于环管试验确定粗骨料膏体充填料浆管道输送参数 邵亚平1，郭利杰2， 陈 寅1，侯国权2 ( 1.新疆喀拉通克矿业有限责任公司，富蕴836107 2.北京矿冶科技集团有限公司, 北京102628) 摘要: 本文以粗骨料膏体充填料浆管道输送为研究背景，基于环管试验测试了不同质量浓度、不同灰砂比、不同充填流量、不同管径条件下的粗骨料膏体管道输送阻力；分析了影响粗骨料膏体充填料浆管道输送阻力的影响因素；最终依据矿山实际生产现状，结合环管试验结果，确定最佳的粗骨料膏体充填参数为：输送能力90m3/h、膏体充填料浆质量浓度80%、灰砂比1:10—1:6、输送管径Φ165×12、输送流速1.6m/s。从而为矿山粗骨料膏体充填系统设计及管道输送系统设计提供可靠的数据支撑。 关键词: 粗骨料 膏体充填 环管试验 管道参数 沿程阻力 Determination of conveying parameters of coarse aggregate paste filling slurry pipeline based on annular tube test Shao yaping, Guo lijie, Chen yin, Hou guoquan2 （1. Xinjiang Kalatongke Mining Co.,Ltd, Fuyun 836107 2.Beijing General Research Institute of Mining and Metallurgy, Beijing 102628） Abstract: On the background of the pipeline transportation of coarse aggregate paste slurry, the pipeline transportation resistance under different mass concentrations, cement-sand ratios, filling flow rates, and pipe diameters were determined based on the round-pipe test, The major factors affecting the pipeline resistance of the coarse aggregate paste slurry were analyzed. Combined with the results of annular tube test, the optimum filling parameters of coarse aggregate paste were determined as follows: the pipeline capacity was 90m3/h, the mass concentration was 80%, the cement-sand ratio was 1:10-1:6, the pipe diameter was Φ165×12, and the flow rate was 1.6m/s. It provided reliable data support for the design of the coarse aggregate paste filling system and the design of pipeline conveying system. Key words: Coarse aggregate, Paste filling, Round-pipe test, Pipeline parameters, On-way resistance 1引言 膏体充填具有不离析、不脱水、充填体质量高等优点，在全世界范围内备受关注。膏体充填技术最早在南非得到应用，随后推广应用至加拿大、澳大利亚、德国、美国等矿业发达国家 ADDIN NE.Ref.{7F9D6474-4CC5-4B9E-B200-2A97DE682844}[1-4]。我国在膏体充填方面的研究虽然起步较晚，但发展迅速。近年来，膏体充填技术在国内也得到了长足的发展，技术水平取得了很大的进步，且应用矿山不断增加。 膏体充填料浆制备是保障膏体充填质量的关键，其中对骨料的粒径要求比较严格[3]，骨料中粗、细、极细等骨料需保持合理的配比。根据国内外泵送膏体充填的实践经验，可将输送的固