瞬时超宽谱脉冲串产生方式.PDFVIP

第 14 卷 第 3 期 太赫兹科学与电子信息学报 Vo1.14，No.3 2016 年 6 月 Journal of Terahertz Science and Electronic Information Technology Jun.，2016 文章编号：2095-4980(2016)03-0413-04 瞬时超宽谱脉冲串产生方式 陆 巍，丁恩燕，杨周炳，刘天文 ( 中国工程物理研究院 应用电子学研究所，四川 绵阳 621999) 摘 要 ：通过对国内外瞬时多脉冲产生技术的调研，结合超宽谱脉冲的特点，开展脉冲分割 方式产生超宽谱多脉冲、形成线串联方式产生超宽谱多脉冲、多脉冲合成方式产生超宽谱多脉冲 的技术研究，确定利用形成线串联方式产生超宽谱多脉冲的技术路线；对充电时间和开关电容等 对产生多脉冲的影响因素进行分析和实验研究，改进了四脉冲形成线充电方式，完成超宽谱四脉 冲产生实验装置的设计，在负载上获得瞬时超宽谱多脉冲，脉冲数 4 个，脉冲宽度 3.5 ns ，输出 脉冲之间的间隔小于 10 ns。 关键词 ：超宽谱；开关；脉冲形成线；多脉冲 中图分类号 ：TN782 文献标识码 ：A doi ：10.11805/TKYDA201603.0413 Generation technology of instant UWB multi-pulse LU Wei，DING Enyan，YANG Zhoubing，LIU Tianwen (Institute of Applied Electronics，China Academy of Engineering Physics，Mianyang Sichuan 621999，China) Abstract： The generation of UWB(Ultra Wide -Band) multi-pulse is studied through the investigation, combined with the characteristics of UWB pulse. The technical research includes the UWB multi-pulse generation by the means of pulse sequence, forming line in series connection, and multi-pulse synthesis. The technical way of generating UWB instant multi -pulse by the means of forming line in series connection is confirmed. The effects of charging time and switched capacitor on multi-pulse generation are analyzed and the experiments are also conducted. The charging method of four -pulse forming line is improved. The design of experiment equipment used for the generation of UWB 4 pulses is completed. The UWB instant multi-pulse is obtained on the load, which have the characteristics