Concepts NREC CADTranslator软件的几何导入功能.pdf

Geometry import with CADTranslator Oleg B. Dubitsky Corporate Fellow Associate Director –Software Concepts NREC © 2006 Concepts ETI, Inc. CADTrasnlator - Helper application • Read in IGS/Parasolid file formats for flowpath + blades • Remove unnecessary objects • Slice blades to extract blade surface data –PS/SS curves (including flowpath contours & other) • Write surface files, suitable for CADFIT or/and scripted import and reconstruction of geometry in Axcent • Other (CAM,…) © 2006 Concepts ETI, Inc. Example • Start CADTranslator • Open IGES project •Tune Visibility and Selection features © 2006 Concepts ETI, Inc. Example • Set directions for rotation axis and flow • Select shroud surface and remove it © 2006 Concepts ETI, Inc. Example • Select nozzle surface, create isolines (blade sections) • Adjust ends of the iso-lines to form PS of the blade (include sufficient portions of LE and TE curves) © 2006 Concepts ETI, Inc. Example • Again select nozzle surface and form iso-lines • Adjust ends of the iso-lines to form SS of the blade (include sufficient portions of LE and TE curves) © 2006 Concepts ETI, Inc. Example • Set output format for blade sections © 2006 Concepts ETI, Inc. Example • Open collection tool • Select PS curves (hub to shroud) • Collect PS curves •Select SS curves •Collect SS curves © 2006 Concepts ETI, Inc. Example • Export nozzle sections as surface file • Change output type to hub and shroud contours © 2006 Concepts ETI, Inc. Example • Select and collect hub and shroud contours • Append hub and shroud contour data to nozzle geometry © 2006 Concepts ETI, Inc. Example • Select and col