焊接结构零件的疲劳强度焊有侧板的平板零件结构应力设计方案.PDF

37 : 1006- 754X( 2000) 0 1- 0037- 05 , M . Wagner 翻译: 丁培番 译校: 陈 巍 : 借助结构应力设计方案预估焊接零件寿命时, 采用 一种比较简单的有限元计 方法确定起决定作用的应 力在计 实践中恰好证明了这种方法的优点然而为编制有限元网格 一定要确立明确的方针在这方面, 供 研究的设计结构至关重要为此还介绍了另 一种编制有限元网格的方法为了进行比较, 研究了按照 Radaj 的 缺口应力集中方法的结果疲劳强度实验有助于检验计 结果 Fatigue Strength of Welded Constructional Details the Structural Stress Approach in Case of Plane Components with Welded Side Gussets Abstract: F or t he determ inat ion o the li e expect at ion o w elded components by means o t he struc t ural stress approach comparat ively simple inite element calculations are carried out to det ermine t he relevant stresses . T his act is especially an advantage in pract ical applicat ions. H owever, exact guide lines to build t he inite element meshes have t o be const itut ed . T he examined design detail is especial critical in t his respect . T here ore an alt ernat ive met hod t o de ine t he st ructure o the init e element meshes is described. T he results yielded w ith t he notch st ress approach according t o Radaj are regard ed in comparison . Fatigue t est s are used to check the calculated results. , 1 2 , , 1 GL - D36 ( 1) , 10m m , , 630kN Schenck , R = 0, [ 1] , , , [ 2] 30Hz ( Whlerlinie) ( M . Wag ner , 2) , , , 100824 , , 310022 38