粉末热等静压和铸造Be.pdf

19 12 2009 12 Vol.19 No.12 The Chinese Journal of Nonferrous Metals Dec. 2009 1004-0609(2009)12-2128-08 Be-Al 1, 2 2 2 3 1 1 1 (1. 110004 2. 753000 3. 750021) Be-Al Be-Al Be/Al Al Be-Al Be Be-Al Be Al Be Al Al Be Al Be-Al Be Be-Al Be/Al Be TG146.2; TB383 A Fracture mechanisms of hot isostatic pressed powder and as-cast Be-Al alloys under tensile tests at room temperature 1, 2 2 2 3 1 1 1 XU De-mei , LI Feng , WANG Zhan-hong , HE Li-jun , REN Yu-ping , PEI Wen-li , QIN Gao-wu (1. Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, Northeastern University, Shenyang 110004, China; 2. Key Laboratory for Rare Materials, Ningxia Province, Northwest Rare Metal Materials Research Institute, Shizuishan 753000, China; 3. School of Physics and Engineering, Ningxia University, Yinchuan 750021, China) Abstract: The tensile fracture behaviors of hot isostatic pressed (HIPed) powder and as-cast Be-Al alloys were studied systematically by using scanning electron microscope (SEM) and electron probe of microanalysis (EPMA). The results show that one main crack source and many sub-crack sources happen in the fracture microstructure of the HIPed powder Be-Al alloy. The crack sources are derived from the Be/Al phase interfaces and the thin area of the Al phase, which is followed by crack extending and converging. The fracture is one course of m