基于ARM处理器与uClinux的嵌入式网络网关研究-控制理论与控制工程专业论文.docxVIP

武汉理工人学硕士学位论文Abstract 武汉理工人学硕士学位论文 Abstract With the rapid development of INTERNET．we are easier to release and obtain info加ation through INTERNET．If we use INTERNET in industrial monitor field，we wil】cost lCSS and monitor farthen But industrial deviCCS don’t support TCP／JP．So we study a network gateway to realize the communication between ImRNET client and industrial PLc． It can USe RS-485 interface and the computer link protocol to communicate with the mitsubishi PLC．can read and write the PLc． It realizes a server based on Linux Socket，many clients can browse the Selwer but only supervisor call control the server． It realizes the communication between PLC and INTERNET client which makes client can browse PLC and COntrol PLC． It supports user configuration，user can set gateway’S IP，port，and netmask and customize it． We design hardware and software to realize above functions．In hardware，design embedded circuit board based on ARM processor including the minister system． RS．485 circuit，network intcrface。user configuration interface and some LBD circuits and SO on．In software，customize uClinux，build debug environment．nen we discuss the whole gateway software from thrce processes：PLC communication process，network communication process and user configuration file download process．And we use inter-process communication and inter-process sychronization to realize data communication and protocol conversion of ditierent protocol interfaces． ne gateway defines simple and credible application protocol and USeS the protocol to write monitor program；defines the format of configuration file and the protocol of configuration file download．It provides a good network monitor solution for user． Key words：ARM processor，uClinux，network gateway，PLC device II 武汉理工人学硕士学位论文第1章概述 武汉理工人学硕士学位论文 第1章概述 本章首先介绍网络网关的项目背景，然后分析网关的设计需求，讨论本课题 研究的网关的国内外研究情况与研究意义，简介嵌入式系统，ARM处理器的特点、 uClinux针对嵌入式应用的特殊处理，最后介绍本文的主要内容。 1．1本课题的项目背景 本课题是以黄石科威自控公司委托开发的“嵌入式服务器与网页生成工具” 项目为背景。该项目构建一个以client／Server模式工作的工业远程监控系统， 其前