基于ARM数字家庭安防系统设计与实现-信号与信息处理专业论文.docxVIP

浙江理工大学硕士 浙江理工大学硕士学位论文 基于 ARM 的数字家庭安防系统设计与实现 万方数据 万方数据 Abstract With the continuous improvement of living standard, the requirements of people have also became higher in home security, the combination of embedded technology and monitoring system will meet the demand in home security. In response to this demand, we design and implement a home security system which is based on embedded platform. The hardware platform is Samsung S3C2440 microprocessor, software platform is embedded Linux system in this design. The security system can notify the user through the mobile phone network, user also can view the situation of home via the Internet. So that user can detect anomalies in time. This article describes the development status and trends in the field of security and combines the advantages and disadvantages of the existing system, put forward the overall solution of home security system in first; then determines the hardware platform and software platform; describes elaborately the building of hardware platform and combines USB camera, wireless communication module, sensor module with the hardware platform later; furthermore, introduces the building of software platform which include the cross-compiler environment, Bootloader transplant, Linux kernel transplant and making file system; then completes the writing and debugging of each module driver; finally completes the programming and debugging of every alarm module and remote monitoring system. At the end of this article is summary and proposes some suggestions to improve the system. This system implements a digital, networked, low cost and small size security solution which is suited for general home to use. It can basically meet the requirement of home user in real-time and reliability of alarm system, and has a good prospect. Key words: Embedded system, ARM, Linux, S3C2440, Alarm system II 目 录 摘 要I Abstract II 第一章 绪论1 1.1 课题研究的背景和意义1 1.2 国内外的研究现状2 1.3 课题主要研究内容4 1.4 本章小结5 第二章 系统总体方案设计6 2.1 系统方案设计原则和基本功能6 2.2