六连杆压力机优化设计和分析.doc

WORD格式整理版 PAGE 学习参考好帮手 本科毕业设计论文 题 目 六连杆压力机优化设计和分析 学 院 名 称 专业班级 学生姓名 学 号 指 导 教 师 学习参考好帮手 摘要 本毕业设计的课题是设计六连杆的压力机并对压力机进行优化设计和运动分析。其目的是对六连杆压力机进行结构设计并对机构尺寸参数、运动分析、等进行优化设计研究，达到滑块在工作行程内速度波动量最小和压力机具有良好的工作特性。 本文在详述国内外压力机发展现状和发展趋势的基础上，对1600KN的闭式单点机械压力机的主要结构和传动系统进行设计。设计中主要包括以下设计部分：六连杆机构的运动分析、传动系统的设计计算、六连杆机构的优化设计和运动分析。 本次设计采用参数化设计对六连杆进行优化设计，用Pro/E软件建立三维模型，将模型导入Adams软件中进行动力学仿真，既可以检验设计方案的合理性，又将对深入研究压力机多连杆机构的优化设计和整机性能参数的优化设计产生深刻的指导意义。 关键词：闭式单点压力机；六连杆机构；优化设计；运动分析 学习参考好帮手 Abstract This graduation design topic is to design six connecting rod press and press for optimization design and motion analysis.Its purpose is to press of six connecting rod for structural design and the size parameters, kinematic analysis and optimization design research, achieve velocity of the slider quantity minimum and the press within the working stroke has a good performance. Press both at home and abroad in detail in this paper, on the basis of present situation and development trend of closed type single point of 1600 KN to design main structure and transmission system of mechanical press.Design mainly includes the following parts: in the design of six bar linkage analysis of the movement , the design calculation of the transmission system, six bar linkage optimization design and motion analysis. This design adopts the parametric design to optimize the six connecting rod design, three-dimensional model is established with Pro/E software, the model into Adams software for dynamic simulation can examine the rationality of the design scheme, and will press for in-depth study for the optimization of linkage and the machine performance parameters on the optimization design of profound significance.