ASTM_A29A29M-2004_热锻及冷加工碳素钢和合金钢棒化学成分.pdfVIP

Designation: A 29/A 29M – 04 Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for1 This standard is issued under the fixed designation A 29/A 29M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope* 1.3 The values stated in inch-pound units or SI units are to 2 covers a group of common require- be regarded as the standard. Within the text, the SI units are 1.1 This specification ments which, unless otherwise specified in the purchase order shown in brackets. The values stated in each system are not or in an individual specification, shall apply to carbon and alloy exact equivalents; therefore, each system must be used inde- steel bars under each of the following ASTM specifications (or pendently of the other. Combining values from the two systems under any other ASTM specification which invokes this may result in nonconformance with the specification. specification or portions thereof): 1.4 For purposes of determining conformance to this speci- fication and the various material specifications referenced in Title of Specification