ATA6824-PNQW;ATA6824-MFHW;ATA6824-MFQW;ATA6824-DK;中文规格书,Datasheet资料.pdfVIP

Atmel ATA6824 High Temperature H-bridge Motor Driver DATASHEET Features ● PWM and direction-controlled driving of four externally-powered NMOS transistors ● High temperature capability up to 200°C junction ● A programmable dead time Is included to avoid peak currents within the H-bridge ● Integrated charge pump to provide gate voltages for high-side drivers and to supply the gate of the external battery reverse protection NMOS ● 5V/3.3V regulator and current limitation function ● Reset derived from 5V/3.3V regulator output voltage ● A programmable window watchdog ● Battery overvoltage protection and battery undervoltage management ● Overtemperature warning and protection (shutdown) ● High voltage serial interface for communication ● QFN32/TPQFP package Description ® The Atmel ATA6824C is designed for DC motor control application in automotive high temperature environment like in mechatronic assemblies in the vicinity of the hot engine, e.g. turbo charger. With a maximum junction temperature of 200°C, Atmel ATA6824C is suitable for applications with an ambient temperature up to 150°C. The IC includes 4 driver stages to control 4 external power MOSFETs. An external micro- controller provides the direction signal and the PWM frequency. In PWM operation, the high-side switches are permanently on while the low-side switches are activated by the PWM frequency. Atmel ATA6824C contains a voltage regulator to supply the microcon- troller; via the input pin VMODE the output voltage can be set to 5V or 3.3V respectively. The on-chip window watchdog timer provides a pin-programmable time window. The watchdog is internally trimmed to an accuracy of 10%. For communication a high voltage serial interface with a maximum data range of 20kBaud is integrated.