第5讲-驱动回路设计1.pptVIP

寄生导通 目前经常被使用的驱动能量传输到驱动器的电位隔离传输方法 驱动和状态反馈信号的传输原理 功率MOSFET或IGBT模块的主要特性受到VGG+，VGG和RG的影响 A further advantage of the spring contacts is the very direct access to the IGBTs. Therewith a very switching behaviour can be achieved. There is nor the risk of noises on wires neither any risk of loose wires or connectors, since there are no wires or connectors. The driver is mounted directly on top of the IGBT module and allows – as additional feature- for a very compact design of the inverter. Nuremberg, April 2008 Welcome to the general presentation of SKYPER 52 digital This presentation will help you to be successful at the customer, when presenting SKYPER 52 digital. The order of the parts and the charts is not fixed. Use this presentation as a pool of possibilities. Adapt the presentation due to the present demands at your customer. Please feel free to include charts from different presentations. For questions or suggestion of contents please contact me (markus.hermwille@). Markus Hermwille Senior Product Manager Electronics Nuremberg, April 2008 Welcome to the general presentation of SKYPER 52 digital This presentation will help you to be successful at the customer, when presenting SKYPER 52 digital. The order of the parts and the charts is not fixed. Use this presentation as a pool of possibilities. Adapt the presentation due to the present demands at your customer. Please feel free to include charts from different presentations. For questions or suggestion of contents please contact me (markus.hermwille@). Markus Hermwille Senior Product Manager Electronics 电气结构图 SKYPER 42 电气性能 输出通道 2 集电极-发射极电压 1700V 绝缘电压 4kVAC* 每路输出功率 4W 每路门极峰值电流 30A 每路门极平均电流 150mA 门极电荷 50μC 门极电压 +15V/- 8V 电源电压 15V 信号电压 15V 开关频率 100kHz 工作温度 -40 … +85°C 为大电流设计的IGBT 驱动 SKiM 63 -------------- 6 x IGBT SKiM 63 驱动图示 SKiM 63 驱动参数 --The End-- L’economia è in crescita. C’è sempre una maggiore richiesta di energia ma il problema è la limitata disponibilità delle risorse. L’obiettivo diventa al