全喂入背负式水稻联合收割机割台设计 (2)（机械CAD图纸）.docVIP

本科机械毕业设计论文CAD图纸 QQ 401339828 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 摘要 割台是联合收割机的主要工作部件之一，其功用是完成割禾工作，并随即把割倒的谷物集中连续不断的输送给输送槽。此次设计的为带搅龙输送器的卧式割台，主要包括切割器、偏心拨禾轮、割台输送搅龙和割台框架。本设计在相关参考资料及收割机总体设计的的基础上，完成了割台部分的设计：并且根据收割机总体的工作要求，进行了切割器、偏心拨禾轮、割台搅龙以及割台框架的选择、设计与计算。本次设计的割台机构体积小、重量轻、通过性与适应性好。该机构装在轴流式全喂入轴流式联合收割机上，能确保掉粒少、脱离干净、破碎率低。 关键词：割台、全喂入、切割器、割台搅龙、偏心拨禾轮 Abstract Cutting machine is one of the main working parts of combine harvester, its function is to cut grain work done, and then pour the cutting feed grain concentrated continuous delivery slots. The design for mixed with dragon conveyor horizontal cutting machine, mainly includes cutter, eccentric wheel is designed, and cut transportation stirring dragons and cut framework. This design in the related resources and, on the basis of the overall design of the harvester, completed the design of the parts, and according to the requirements of the harvester general work, cutter, eccentric wheel, cutting platform is designed to stir the dragon and the selection, design and calculation of the frame. The design of the cutting machine is small in size, light weight, through sex and good adaptability. The agency in axial feeding all axial-flow combine harvester, can ensure off less grain, from the clean, low broken rate. Key words : cut sets、whole feeding、cutter 、eccentric dial the hetian round 、spiral push for transport 目录 TOC \o 1-3 \h \u HYPERLINK \l _Toc281 摘要 PAGEREF _Toc281 2 HYPERLINK \l _Toc26550 一 绪论 PAGEREF _Toc26550 5 HYPERLINK \l _Toc9889 1.1 我国联合收割机的现状 PAGEREF _Toc9889 6 HYPERLINK \l _Toc31949 1.2我国联合收割机的发展前景 PAGEREF _Toc31949 6 HYPERLINK \l _Toc16369 1.3 国外收割机的状况 PAGEREF _Toc16369 7 HYPERLINK \l _Toc27194 1.4 设计的主要内容 PAGEREF _Toc27194 7 HYPERLINK \l _Toc563 二 水稻联合收割机总体设计 PAGEREF _Toc563 8 HYPERLINK \l _Toc24569 2.1 联合收割机的类型定位 PAGEREF _Toc24569 9 HYPERLINK \l _Toc22274 2.2 联合收割机的整机结构及选择 PAGEREF _Toc22274 9 HYPERLINK \l _Toc31878 2.3 水稻联合收割机的工作流程 PAGEREF _Toc31878 9 HYPERLINK