毕业论文-基于CAN总线的火灾报警系统的设计.doc

毕业论文-基于CAN总线的火灾报警系统的设计.doc

  1. 1、本文档共29页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
第3章 系统硬件设计 7 - 摘要 随着人们防火意识的增强,火灾探测报警技术越来越受到人们的重视。传统的火灾报警系统多采用RS485总线作为通信方式,并采用单一的温度传感器监测现场环境,在灭火执行装置中使用玻璃球洒水喷头。 本文主要研究基于CAN总线的火灾报警系统的设计方案和实现方法。与RS485相比,CAN总线具有突出的可靠性、实时性和灵活性,能够解决总线控制、冲突检测、链路维护等问题。本文研究的火灾报警系统采用温湿传感器和烟雾传感器来探测火灾现场的数据信息,对火灾的判断使用温度、湿度和烟雾浓度三种信息参数,当报警点探测到的环境数据超过传感器的阈值时,终端开始报警。 本文的设计采用主从式结构。终端和报警点都采用AT89S52芯片。为了实现终端对报警点的实时监测,在终端和报警点处都设计有CAN通信电路模块,由控制器SJAl000和收发器82C250组成CAN通信接口。终端的外围电路部分包括GSM电路、蜂鸣器报警电路、状态指示电路;报警点的外围电路部分包括DHT11传感器电路和MQ-2传感器电路。 关键词:火灾报警,CAN,实时监测 ABSTRACT With the enhancement of people’S awareness of fire prevention,fire detection alarm technology attracts more and more people’S attention.Most of the traditional fire alarm system used RS485 to communicate,and adopt a single temperature sensor to monitor the environment at the scene,and used glass ball sprinkler head as the performing devices. The design and realization of fire alarm system was studied based on CAN bus.Compared with traditional fire alarm systems,such as based on RS-485,the communication of CAN bus was more reliable,real-time and flexible.In this paper, we study the fire alarm system adopts the temperature humidity sensors to detect the scene of the fire and smoke sensor data information, the use of temperature, humidity and their appreciation of the fire smoke concentration parameters of three kinds of information, when the emergency alarm detect environmental data exceeds the threshold value of the sensor, the terminal began to call the police. This system used master-slave structure.Terminal and stations are adopted AT89S52 .In order to communicate,the CAN interface is designed,which is composed by SJAl000 and 82C250.Terminal peripheral circuit part including GSM, buzzer alarm circuit, status indication circuit;The periphery of the emergency alarm circuit part including DHT11 sensor circuit and MQ - 2 sensor circuit. Keywords:fire alarm,CAN,real—time monitor 第一章 前言 1.1火灾报警系统的目的与意义 随着人类社会经济的发展和科技的进步,人类一步一步的征服自然,成为世界的主宰,然而我们依旧依附于大自然,无法摆脱大自然对我们的影响。在洪涝、旱灾等一系列自然灾害中,火灾是最经常、最普遍地威胁

文档评论(0)

***** + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档