简易电子表设计毕业论文.doc

泸州职业技术学院毕业论文 附录A：实验板原理图 本 科 毕 业 设 计 论 文 题 目 系 别 专 业 班 级 学号 学生姓名 指导老师 年 月 摘 要 传统的数字电子时钟采用了较多的分立元器件，不仅占用了很大的空间而且利用率也比很低，随着系统设计复杂度的不断提高，用传统时钟系统设计方法很难满足设计需求。 单片机是集CPU、RAM、ROM、定时器/计数器和多种接口于一体的微控制器。它体积小、成本低、功能强，广泛应用于智能产品和工业自动化上。而51系列的单片机是各单片机中最为典型和最有代表性的一种。，本次设计提出了系统总体设计方案，并设计了各部分硬件模块和软件流程，在用C语言设计了具体软件程序后，将各个模块完全编译通过过后,结果证明了该设计系统的可行性。该设计给出了以AT89C2051为核心，利用单片机的运算和控制功能，并采用系统化LED显示模块实时显示数字的设计方案，适当地解决了实际生产和日常生活中对计时高精确度的要求，因此该设计在现代社会中具有广泛的应用性。 通过实验测试，本设计满足原设计要求，可以显示时分秒日期等，具备闹钟提醒功能。 关键词：AT89C2051,C语言程序，电子钟 ABSTRACT Traditional digital electronic clock with the more discrete components, not only takes up a lot of space and the utilization rate also ratio is very low, with the continuous improvement of the complicated system design, with traditional clock system design method is difficult to meet the design requirements. MCU is a set of CPU, RAM, ROM, timer / counter and a variety of interfaces in one of the micro controller. The utility model has the advantages of small size, low cost and strong function, and is widely used in intelligent products and industrial automation. The 51 series microcontroller is the most typical and the most representative one. , the design proposed overall design scheme of the system, and the design of each part of the hardware modules and software flow, in using C language to design the specific software program, each module fully compiled by later. The results show that the feasibility of the design of the system. The design gives the AT89C2051 as the core, using single-chip computing and control functions, and by using the systematic LED display module displays the real-time digital design scheme, properly solve the actual production and daily life in the timing requirements of high precision, so the design in modern society has extensive application. Th