旋转式侧移车的旋转系统设计毕业设计.doc

毕业论文（设计） 题 目： 旋转式侧移车的旋转系统设计 中原工学院信息商务学院毕业论文（设计） PAGE \* MERGEFORMAT IV 摘 要 随着我国经济的发展，汽车的数量也急剧增加，这虽然对我们的出行带来个方便，但同时也带来了交通堵塞、停车位紧张等一系列问题。车辆拥挤或驶入相对较窄的路面时，很难完成任意角度转向或180度调头，在交通拥堵时很难从拥挤的车流中摆脱。当车位前后都有车时，把车辆停入或从使出都很困难，容易造成事故。在这个背景下，经过反复推敲琢磨，设计了旋转式侧移车。 旋转式侧移车是在普通车子内部添加子车以及升降系统和旋转系统，通过升降系统、驱动系统、旋转系统和内部电力系统之间的相互配合，使该车能够完成原地升降、90度侧移、原地任意角度转向的功能。这些实用的功能增强了汽车的可操作性，从一定程度上解决了交通阻塞和停车位紧张的这些现代社会日益增长的严峻问题。 本文重点是对旋转式侧移车的旋转系统进行设计，通过安装在子车上的导向杆、齿盘以及独立的驱动电机相配合可以完成车体在升起状态下的原地任意角度转向。这些实用的功能增强了汽车的可操控性，从一定程度上解决了交通阻塞和停车位紧张的这些现代社会日益严峻的问题。 关键字：交通堵塞，旋转，侧移，旋转系统 Rotary displacement vehicle rotation system design Abstract With the development of our national economy, the number of cars has increased dramatically, although this on our journey to bring the convenience, but also brought traffic congestion, parking tension and a series of problems. Traffic jam or into a relatively narrow pavement, it is difficult to complete the arbitrary angle steering or 180 degree turn, in the traffic jam is very difficult from the traffic congestion in the shed. When the parking both before and after the car, park their vehicles into or from using is very difficult, easy to cause an accident. In this background, after batted Sato, design of rotary side car. Rotary displacement vehicle is in the ordinary car internal add child car and lifting system and a rotating system, by lifting system, drive system, rotary system and internal power system between cooperate each other, make the car to complete in-situ lifting,90 degrees lateral shift, in arbitrary angle turning function. The utility function is enhanced by vehicle maneuverability, from the extent to solve traffic congestion and parking tense in these modern society increasingly serious problem. This article focuses on the rotary displacement vehicle rotation system design, by installing the car guide rod, fluted disc and the independent drive motor is matched complete car in the rising state in situ arbitrary angle steering. The utility functi